Document
ALUMINUM ELECTROLYTIC CAPACITORS
HD High Ripple Low Impedance series
Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C
Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC).
HC
Low Impedance
HD
Smaller
Specifications
ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Marking
HV
Performance Characteristics
– 40 to +105˚C
6.3 to 50V
22 to 6800µF
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V) tan δ (MAX.)
6.3 0.22
10 0.19
16 0.16
25 0.14
35 0.12
50 0.10
120Hz 20˚C
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3 10 16 25 35 50 120Hz
Impedance ratio Z–25˚C / Z+20˚C
2
2
2
2
2
2
ZT / Z20 (MAX.) Z–40˚C / Z+20˚C
3
3
3
3
3
3
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8, 4000 hours for φD=10), at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 25% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
φD+0.5 MAX. P±0.5
Pressure relief vent
(φ6.3up)
L+ MAX.
15MIN
4MIN
(L < 20) 1.5 (L 20) 2.0
(mm) φD 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 10V 3300µF)
1 2 3 4 5 6 7 8 9 10 11 12
UHD 1 A 3 3 2 M HD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
5 DD
6.3 ED
8 · 10
PD
12.5 ·16
HD
Size code Configuration
Capacitance tolerance (± 20%) Rated capacitance (3300µF) Rated voltage (10V) Series name Type
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
HD series
Standard Ratings
V (Code)
Cap.(µF) 100 150 220 330 470 560
Item Code
101 151 221 331 471 561
Case size
φD × L
(mm)
5 × 11
6.3 × 11
8 × 11.5
680 681
820 1000
821 102
8 × 15 10 × 12.5
1200
1500 2200 3300
3900
122
152 222 332
392
8 × 20 10 × 16 10 × 20 10 × 25 12.5 × 20
12.5 × 25
4700 5600 6800
472 562 682
12.5 × 31.5 12.5 × 35.5
16 × 20 16 × 25
6.3 (0J)
Impedance (Ω) MAX.
Rated ripple
(mArms)
20˚C / 100kHz – 10˚C / 100kHz 105˚C / 100kHz
0.30 0.13 0.072
1.0 0.41 0.22
250 405 760
0.056
0.053
0.041 0.038 0.023 0.022 0.021
0.018
0.016 0.015 0.018 0.016
0.17
0.16
0.13 0.12 0.069 0.066 0.053
0.045
0.041 0.039 0.045 0.043
995
1030
1250 1430 1820 2150 2360
2770
3290 3400 3140 3460
Case size
φD × L
(mm)
5 × 11
6.3 × 11
8 × 11.5
8 × 15 10 × 12.5
8 × 20 10 × 16 10 × 20
10 × 25 12.5 × 20 12.5 × 25 12.5 × 31.5
16 × 20 12.5 × 35.5
16 × 25
10 (1A)
Impedance (Ω) MAX.
Rated ripple
(mArms)
20˚C / 100kHz – 10˚C / 100kHz 105˚C / 100kHz
0.30
1.0
250
0.13
0.41
405
0.072
0.22
760
0.056 0.053
0.17 0.16
995 1030
0.041 0.038
0.023
0.022 0.021 0.018 0.016 0.018 0.015
0.016
0.13 0.12
0.069
0.066 0.053 0.045 0.041 0.045 0.039
0.043
1250 1430
1820
2150 2360 2770 3290 3140 3400
3460
V (Code)
Cap. (µF) 47 56
100 120 220
Item Code
470 560 101 121 221
330 331
470 471
680
820 1000 1200 1500
1800
2200
2700
3300 3900
681
821 102 122 152
182
222
272
332 392
Case size
φD × L
(mm)
5 × 11
6.3 × 11
16 (1C)
Impedance (Ω) MAX.
Rated ripple
(mArms)
20˚C / 100kHz – 10˚C / 100kHz 105˚C / 100kHz
0.30
1.0
250
0.13
0.41
405
8 × 11.5
8 × 15 10 × 12.5 8 × 20 10 × 16
10 × 20 10 × 25 12.5 × 20
0.072
0.056 0.053 0.041 0.038
0.023 0.022 0.021
0.22
0.17 0.16 0.13 0.12
0.069 0.066 0.053
760
995 1030 1250 1430
1820 2150 2360
12.5 × 25 12.5 × 31.5
16 × 20 12.5 × 35.5
16 × 25
0.018 0.016 0.018 0.015 0.016
0.045 0.041 0.045 0.039 0.043
2770 3290 3140 3400 3460
Case size
φD × L
(mm)
5 × 11
25 (1E)
Impedance (Ω) MAX.
Rated ripple
(mArms)
20˚C / 100kHz – 10˚C / 100kHz 105˚C / 100kHz
0.30
1.0
250
6.3 × 11
0.13
0.41
405
8 × 11.5 8 × 15 10 × 12.5 8 × 20 10 × 16
10 × 20
10 × 25 12.5 × 20
0.072 0.056 0.053 0.041 0.038
0.023
0.022 0.021
0.22 0.17 0.16 0.13 0.12
0.069
0.066 0.053
760 995 1030 1250 1430
1820
2150 2360
12.5 × 25 12.5 × 31.5
16 × 20 12.5 × 35.5
16 × 25
0.018 0.016 0.018 0.015
0.016
0.045 0.041 0.045 0.039
0.043
2770 3290 3140 3400
3460
: In this case, 6 will be put at 12th digit of type numbering system.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
HD series.