Document
P645HVN02.4 Product Specification Rev. 0.1
Model Name: P650HVN02.4
Issue Date : 2012/10/18 (*)Preliminary Specifications ( )Final Specifications
Customer Signature
Date AUO
Date
Approved By
Approval By PM Director Paley Fang
_________________________________ ____________________________________
Note
Reviewed By RD Director Eugene Chen
____________________________________ Reviewed By Project Leader
Alex HM Chen
____________________________________
Prepared By PM Antonio Kuo
__________________________________
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 1 / 31
Contents
P645HVN02.4 Product Specification Rev. 0.1
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 3-7 BACKLIGHT SPECIFICATION 4 OPTICAL SPECIFICATION 5 MECHANICAL CHARACTERISTICS 6 RELIABILITY TEST ITEMS 7 INTERNATIONAL STANDARD 7-1 SAFETY 7-2 EMC 8 PACKING 8-1 DEFINITION OF LABEL 8-2 PACKING METHODS 8-3 PALLET AND SHIPMENT INFORMATION 9 PRECAUTION 9-1 MOUNTING PRECAUTIONS 9-2 OPERATING PRECAUTIONS 9-3 ELECTROSTATIC DISCHARGE CONTROL 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 9-5 STORAGE 9-6 HANDLING PRECAUTIONS FOR PROTECT FILM 9-7 OPERATING CONDITION IN PID APPLICATION
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 2 / 31
Record of Revision
Version
Date
1.0 2012/10/18
Page First release
P645HVN02.4 Product Specification Rev. 0.1
Description
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 3 / 31
P645HVN02.4 Product Specification Rev. 0.1
1. General Description
This specification applies to the 64.5 inch Color TFT-LCD Module P650HVN02.4. This LCD module has a TFT active matrix type liquid crystal panel 1920 x 1080 pixels, and diagonal size of 64.5 inch. This module supports 1920 x 1080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
The P650HVN02.4 has been designed to apply the 10-bit 2 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.
* General Information
Items
Specification
Active Screen Size
64.53
Display Area
1428.48 (H) x 803.52 (V)
Outline Dimension
1508.0(H) x 878.0(V) x 12.8(D)
Driver Element
a-Si TFT active matrix
Display Colors
10 bit, 1.07B
Number of Pixels
1920 x 1080
Pixel Pitch
0.744
Pixel Arrangement
RGB vertical stripe
Display Operation Mode
Normally Black
Surface Treatment
Anti-Glare, 3H
Display Orientation
Portrait/Landscape Enable
[1] Please refer to 5.1 Placement Suggestions.
Unit inch mm mm
Colors Pixel mm
Note
Haze 2%
[1]
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 4 / 31
2. Absolute Maximum Ratings
P645HVN02.4 Product Specification Rev. 0.1
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature
Symbol VDD Vin TOP HOP TST HST PST
Min -0.3 -0.3
0 10 -20 10 -
Max 14 4
+50 90 +60 90 65
Unit [Volt] [Volt] [oC] [%RH] [oC] [%RH] [oC]
Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 1: Duration:50 msec.
℃Note 2 : Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 5 / 31
3. Electrical Specification
P645HVN02.4 Product Specification Rev. 0.1
The P650HVN02.4 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input for BLU is to LED driver.
3.1 Electrical Characteristics
3.1.1: DC Characteristics
Parameter
Value
Symbol
Min. Typ.
Max
Unit Note
LCD
Power Supply Input Voltage Power Supply Input Current
VDD 10.8 12.0 IDD -- 0.58
Power Consumption
PC -- 6.96
Inrush Current Input Differential Voltage
IRUSH
∣ ∣VID
-200
-400
LVDS
Differential Input High Threshold Voltage
VTH
+100
--
Interface Differential Input Low Threshold Voltage
VTL
-300
--
CMOS
Input Common Mode Voltage Input High Threshold Voltage
VICM VIH (High)
1.10 1.25 2.7 --
Interface Input Low Threshold Voltage
VIL (Low)
0
--
Backlight Power Consumption
PBL -- 151.6
Life Time
50,000 --
Note :
1. Test Condition: (1) VDD = 12.0V (2) Fv = Type Timing, 60Hz
℃(3) Fclk= Max freq.
(4) Temperature = 25 (5) Typ. Input.