Document
Product Specification
AU OPTRONICS CORPORATION
ϭʳ Preliminary Specification Ϯʳ Final Specification
Module Model Name
15.1” Color TFT-LCD (Free Shape LCD) G151EVN01.0
G151EVN01.0
Customer
Date
Approved by
Date
Vito Huang
2012/06/21
Checked & Approved by
Date
Prepared by
Date
Jimmy Tsai
2012/06/21
Note: This Specification is subject to change without notice.
General Display Business Division / AU Optronics corporation
document version 1.0
www.avnet-embedded.eu
1
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
Record of Revision
Version and Page
Date
Old description
0.1 2012/02/16 All First Edition for Customer
17
1.0 2012/06/21
New Description All
Remark
document version 1.0
www.avnet-embedded.eu
3
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
2. General Description
This specification applies to the 15.1 inch-wide Color TFT-LCD Module G151EVN01.0.
The display supports the 1280(H) x 248(V) screen format and 16.7M colors. All input signals are 2 Channels LVDS interface compatible.
LED driver board is included. G151EVN01.0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
Items Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode Nominal Input Voltage VDD
Unit [inch] [mm]
[mm]
[Volt]
Specifications 15.1 376.32 (H) x 72.91(V) 1280(x3) x 248 0.294 (per one triad) x 0.294
R.G.B. Vertical Stripe P-MVA Mode,Normally Black +5.0 V
Typical Power Consumption
[Watt]
10.85 (1.25 (TFT)+9.6 (LED) W (Typ)) (All white pattern)
Weight Physical Size Electrical Interface Surface Treatment
[Grams] [mm]
700 (Max) 396 (H) x 100.8 (V) x 17.3 (D)
Dual Channel LVDS Anti-glare, Hardness 3H
Support Color
Temperature Range Operating Storage (Non-Operating)
RoHS Compliance
16.7M colors (8-bits )
[oC] 0 to +50 [oC] -20 to +60
RoHS Compliance
document version 1.0
www.avnet-embedded.eu
5
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25
Item
Unit Conditions
White Luminance
[cd/m2]
IF= 80mA
(Room Temperature): Min. Typ. Max.
240 300
-
Uniformity
% 9 Points
75 80
-
Note 1
1, 2, 3
Contrast Ratio Cross talk Response Time
Viewing Angle
Color / Chromaticity Coordinates (CIE 1931)
Color Gamut
% [msec] [degree] [degree] [degree] [degree]
%
Rising Falling Rising + Falling Gray to Gray
Horizontal (Right) CR = 10 (Left)
Vertical CR = 10
Red x Red y Green x Green y Blue x Blue y White x White y
(Upper) (Lower)
1600 -
75 75 75 75 0.597 0.290 0.277 0.551 0.092 0.017 0.263 0.279 -
2000 15
5 20 8
89 89 89 89 0.647 0.340 0.327 0.601 0.142 0.067 0.313 0.329 70
1.5
-
0.697 0.390 0.377 0.651 0.192 0.117 0.363 0.379 -
4 5 6
7
Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture Test Point Center Environment < 1 lux
document version 1.0
www.avnet-embedded.eu
LCD Module Measuring distance
SR_3 or equivalent
Module Driving Equipment
6
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
Note 2: Definition of 9 points position (Display active area)
90 %
50 %
10 %
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
Minimum Brightness of nine points
ӬW9 =
Maximum Brightness of nine points
Note 4Κ Definition of contrast ratio (CR):
Brightness on the “White” state Contrast ratio (CR)=
Brightness on the “Black” state
Note 5Κ Definition of cross talk (CT)
CT = | YB – YA | / YA × 100 (%) Where YA = Luminance of measured location without gray level 255 pattern (cd/m2) YB = Luminance of measured location with gray level 255 pattern (cd/m2)
1/2 1/6
2/3 1/2 1/3 1/6
A 127 gray level
1/6
1/2 B
A’ 127 gray level
1/6 1/3 1/2 B’ 2/3
document version 1.0
www.avnet-embedded.eu
7
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of amplitudes. Please refer to the figure as below.
% Tf
Optical response
100 90
10 0
White
Note 7: Definition of viewing angle
Black
Tr
White
range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired measurement viewing angle.
document version 1.0
www.avnet-embedded.eu
8
Product Specification
AU OPTRONICS CORPORATION
G151EVN01.0
3. Functional Block Diagram
The following diagra.