Document
ALUMINUM ELECTROLYTIC CAPACITORS
GX Snap-in Terminal Type, 105°C Long Life Assurannce, Smaller-Sized series
Long life assurance series withstanding 5000 hours application of rated ripple current at 105°C. Suited for rectifier circuit of general inverter, switching power supply. Compliant to the RoHS directive (2002/95/EC).
GY
Smaller
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
GX
Performance Characteristics – 25 to +105°C 200 to 450V 82 to 2200µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ)
Rated voltage(V) tan δ (MAX.)
200 to 400 0.15
450 0.20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage(V) Impedance ratio (MAX.) Z–25°C/ Z+20°C
200 250 4
400 450 8
Measurement frequency : 120Hz
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
φD +1.5 MAX. 4.0±0.5 2.5
Drawing
Polarity bar Sleeve (P.E.T.)
L±2 Pressure relief vent
10 ±0.1
4.0±0.5
10
0.8
+0.2 -0.1
0.8 +-00..21
Type numbering system (Example : 400V 120µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGX 2G 1 2 1 ME L Z 3 0
Configuration Capacitance tolerance (±20%) Rated capacitance (120µF)
Rated voltage (400V) Series name Type
Case length code Case dia. code
φD Code 22 Z 25 A 30 B 35 C
2 - 2 φ ±0.1 (PC board hole dimensions)
+0.2
1.5 -0.1 (Terminal dimensions)
The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.
Minimum order quantity : 50pcs. Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
GXseries
Dimensions
Cap. (µF)
330 390 470 560
680
820
1000
1200
1500 1800 2200
Size
φD × L(mm) 22 × 25 22 × 30 22 × 35 25 × 25 22 × 35 22 × 40 25 × 35 30 × 30 22 × 50 25 × 40 25 × 45 30 × 35 35 × 30 25 × 50 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50
200V (2D)
Rated ripple (mA)
1100
Leakage Current
(mA)
0.77
1380
0.83
1550
0.91
1390
0.91
1550
1.00
1730
1.10
1870
1.10
1980
1.10
2180
1.21
2090
1.21
2350
1.34
2220
1.34
2610
1.34
2400
1.46
2530
1.46.