Document
Global LCD Panel Exchange Center
www.panelook.com
Spec. No.: Version: Total pages: Date:
DDPM-EN01-0.1 1 24
2003-Mar-06
AU OPTRONICS CORPORATION
Product Specifications
19.0” SXGA Color TFT-LCD Module
Model Name: M190EN01 V.1
Approved by
Prepared by
DDBU Marketing Division / AU Optronics Croporation
Customer
Checked & Approved by
(C) Copyright AU Optronics, Inc. March, 2003 All Rights Reserved. No Reproduction and Redistribution Allowed.
M190EN01 v.1 Ver0.1
1/24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specifications 19.0” SXGA Color TFT-LCD Module
Model Name: M190EN01 V.1
(• ) Preliminary Specifications ( ) Final Specifications
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics, Inc. March, 2003 All Rights Reserved. No Reproduction and Redistribution Allowed.
M190EN01 v.1 Ver0.1
2/24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
i Contents
ii Record of Revision 1.0 Handling Precautions 2.0 General Description
2.1 Display Characteristics 2.2 Functional Block Diagram 2.3 Optical Characteristics 2.4 Pixel format image
3.0 Electrical characteristics
3.1 Absolute Maximum Ratings 3.2 Connectors 3.3 Signal Pin 3.4 Signal Description 3.5 Signal Electrical Characteristics 3.6 Interface Timing
3.6.1 Timing Characteristics 3.6.2 Timing Definition 3.7 Power Consumption 3.8 Power ON/OFF Sequence
4.0 Backlight Characteristics
4.1 Signal for Lamp connector 4.2 Parameter guide line for CCFL Inverter
5.0 Vibration, shock and drop
5.1 Vibration and shock 5.2 Drop test
6.0 Environment
6.1 Temperature and humidity 6.1.1 Operating conditions 6.1.2 Shipping conditions
6.2 Atmospheric pressure 6.3 Thermal shock
7.0 Reliability
7.1 Failure criteria 7.2 Failure rate
7.2.1 Usage 7.2.2 Components de-rating 7.3 CCFL life 7.4 ON/OFF cycle
8.0 Safety
8.1 Sharp edge requirement 8.2 Material
8.2.1 Toxicity 8.2.2 Flammability 8.3 Capacitors 8.4 Hazardous voltage
9.0 Other requirements
9.1 Smoke free design 9.2 National test lab requirement
10.0 Mechanical Characteristics
(C) Copyright AU Optronics, Inc.
March, 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
M190EN01 v.1 Ver0.1
3/24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
ii Record of Revision
Version and Date Page Old description
New Description
0.1 2003/03/06 All First Edition for Customer All
Remark
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or s.