Document
ALUMINUM ELECTROLYTIC CAPACITORS
GJ Snap-in Terminal Type, 105°C Low-Profile Sized
(15)
(15mmL) series
Withstanding 2000 hours application of rated ripple current at 105°C. Smaller than low-profile GJ series. Ideally suited for flat design of switching power supply. Compliant to the RoHS directive (2002/95/EC).
GJ
Low Profile
G J (15)
Specifications
Item Performance Characteristics
Category Temperature Range
– 40 to +105°C (160 to 250V) , – 25 to +105°C (315 to 400V)
Rated Voltage Range
160 to 400V
Rated Capacitance Range 39 to 390µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
Stability at Low Temperature
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
0.20 MAX. 120Hz 20°C
Rated voltage(V)
Impedance ratio ZT/Z20(MAX.)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
Measurement frequency : 120Hz
160 to 250
315 • 400
38
12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with white color letter on black sleeve.
φ D +1MAX. 4.0±0.5 2.5
Drawing
Polarity bar Sleeve (P.E.T.)
15±2
4.0±0.5 Pressure relief vent
10
10 ±0.1
0.8
+0.2 -0.1
0.8 +-00..21
2-2 φ ± 0.1
(PC board hole dimensions)
1.5
+0.2 -0.1
(Terminal dimensions)
Type numbering system (Example : 200V 330µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGJ 2D 3 3 1 ME L C 1 5
Case length code
Case dia. code
Configuration Capacitance tolerance (±20%)
Rated capacitance (330µF) Rated voltage (200V) Series name
φD Code 20 Y 22 Z 25 A 30 B 35 C
Type
Frequency coefficient of rated ripple current
Frequency (Hz)
50
60 120 300
Coeff. 160 to 250V
0.81
0.85
1.00
1.17
315 · 400V
0.77
0.82
1.00
1.16
Minimum order quantity : 50pcs. Dimension table in next page.
1k 1.32 1.30
10k 1.45 1.41
50k or more 1.50 1.43
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
GJ(15)series
Dimensions
Cap. (µF) 150 180 220 270 330 390
Size
φD × L(mm) 20 × 15 22 × 15 25 × 15 30 × 15 30 × 15 35 × 15
160V(2C)
Rated ripple Leakage Current
(mA)
(mA)
550 0.46
650 0.50
800 0.56
950 0.62
1000
0.68
1200
0.74
Code
LGJ2C151MELY15 LGJ2C181MELZ15 LGJ2C221MELA15 LGJ2C271MELB15 LGJ2C331MELB15 LGJ2C391MELC15
Cap. (µF) 120 150 180 22.