Document
ALUMINUM ELECTROLYTIC CAPACITORS
HN Ultra Low Impedance, For PC motherboard series
Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C
Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC).
HZ
Low Impedance
HN
Low Impedance
HM
Specifications
ltem Performance Characteristics
Category Temperature
– 25 to +105˚C
Rated Voltage Range
6.3 to 16V
Rated Capacitance Range 330 to 8200µF
Capacitance Tolerance
± 20% (120Hz, 20˚C)
Leakage Current
After 2 minutes' application of rated voltage, leakage current is less than 0.03CV
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF
Tangent of loss angle (tan δ)
Rated voltage (V)
6.3
10
16
tan δ (MAX.)
0.22
0.19
0.16
Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z—25˚C / Z+20˚C
6.3 3
10 3
16 3
Sleeve : BLACK
120Hz 20˚C 120Hz
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 2000 hours at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±30% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with gold color letter on black sleeve.
Radial Lead Type
Type numbering system (Example : 6.3V 1800µF)
Sleeve (P.E.T.)
φd
1 2 3 4 5 6 7 8 9 10 11 12
UHN 0 J 1 8 2 MPD
Size code Configuration
φD+0.5 MAX. P±0.5
Capacitance tolerance (± 20%)
Rated capacitance (1800µF)
L+1.5MAX. Pressure relief vent
15MIN
4MIN
(mm) φD 8 10 12.5 16 P 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.6 0.8
• Please refer to page 20 about the end seal configulation.
Standard Ratings
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
8 · 10
PD
12.5 · 16
HD
Rated voltage (6.3V) Series name Type
V (Code)
6.3 (0J)
10 (1A)
16 (1C)
Cap. (µF) Code Item
Case size φD × L (mm)
Impedance Rated ripple
(mΩ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
Case size φD × L (mm)
Impedance Rated ripple
(mΩ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
Case size φD × L (mm)
Impedance Rated ripple
(mΩ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
330 470 560
680
820
1000
1200
1500
1800
2200 2700 3300 4700 5600 8200
331 471 561 8 × 11.5
681
821 8 × 11.5 8 × 15
102 10 × 12.5
122 8 × 15
10 × 12.5
152 8 × 20
10 × 16
182
10 × 16 8 × 20
10 × 16 222 10 × 20
272 10 × 20
332
10 × 25 12.5 × 20
472 12.5 × 20
562 12.5 × 25
822 16 × 25
21
21 20
18
20 18 12 11 11 12 11 10 10 9 9 9 8 7
1300
1300 1700
1760
1700 1760 2220 2280 2280 2220 2280 2900 2900 3190 3190 3190 3370 3610
8 × 11.5
8 × 11.5
10 × 12.5
10 × 12.5 10 × 12.5 10 × 16
8 × 20 10 × 16 10 × 16
8 × 20
10 × 20 10 × 25 12.5 × 20 12.5 × 20
12.5 × 25 12.5 × 25
16 × 25
21
21
18
18 18 11 12 11 11
12
10 9 9 9
8 8 7
1300
1300
1760
1760 1760 2280 2220 2280 2280
2220
2900 3190 3190 3190
3370 3370 3610
8 × 11.5 8 × 11.5 10 × 12.5
10 × 12.5 8 × 20
10 × 16 10 × 16 10 × 16
8 × 20 10 × 20 10 × 20
10 × 20
10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 25
16 × 25
21 21 18
18 12 11 11 11 12 10 10
10
9 9 9 8 8
7
1300 1300 1760
1760 2220 2280 2280 2280 2220 2900 2900
2900
3190 3190 3190 3370 3370
3610
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
: In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system.
CAT.8100Z
.