Document
ALUMINUM ELECTROLYTIC CAPACITORS
CA Miniature Sized, High Ripple Current, Long Life series
High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC).
PB
Long Life
CA
Smaller
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
CS
Performance Characteristics – 25 to +105°C 160 to 450V 6.8 to 220µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX.)
160 0.15
Measurement frequency : 120Hz, Temperature : 20°C
200 250 350 400 450
0.15
0.15
0.20
0.20
0.20
Stability at Low Temperature
Rated voltage (V)
160
Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 3
Measurement frequency : 120Hz
200 250 350 400 450 33666
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 12000 hours (10000 hours for φD=10) at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
φD+0.5MAX. P±0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure relief vent
L +1.5MAX.
15 MIN
4 MIN
(mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 250V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12
U CA 2 E 1 0 1 M HD T
Size code Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) Rated voltage (250V)
Series name Type
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
10 PD
12.5 to 18
HD
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
CA series
Dimensions
Cap. (µF)
V Code
6.8 6R8
10 100
22 220
33 330
47 470
68 680
100 101
150 151
220 221
160 2C
10 × 16 10 × 20
250 500
10 × 20
565
12.5 × 20
725
12.5 × 25 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25 16 × 31.5 18 × 25
950 970 1280 1180 1360 1360 1400 1400
200 2D
10 × 16 10 × 20
250 500
12.5 × 20
600
12.5 × 20
780
12.5 × 25 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25
950 970 1280 1180 1360 1360
18 × 31.5 1700
250 2E
10 × 20 12.5 × 20
300 600
12.5 × 20
630
12.5 × 25 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25
720 750 1000 920 1400 1345
18 × 31.5 1500
350
2V
10 × 16 10 × 20
220 280
12.5 × 20
350
16 × 20
600
16 × 25 18 × 20 16 × 31.5 18 × 25
700 750 1100 875
400
2G
10 × 16 10 × 20 12.5 × 20 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25
220 280 430 600 640 640 840 840
18 × 31.5 1000
450
2W
10 × 20 12.5 × 20
16 × 25 18 × 20 16 × 31.5 18 × 25
150 320 560 560 700 700
18 × 31.5 900
Case size
φD × L (mm)
: Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system.
Frequency coefficient of rated ripple current
Frequency 50Hz
120Hz
1kHz
10kHz
Coefficient
0.40
0.50
0.80
0.90
100kHz or more 1.00
CAT.8100Z
.