DatasheetsPDF.com

LAQ2G152MEL Dataheets PDF



Part Number LAQ2G152MEL
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet LAQ2G152MEL DatasheetLAQ2G152MEL Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature Range (692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than AK series. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Sm.

  LAQ2G152MEL   LAQ2G152MEL



Document
ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature Range (692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than AK series. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Smaller AQ Specifications Item Performance Characteristics Category Temperature Range –25 ~ +105°C Rated Voltage Range 200 • 220 • 400V Rated Capacitance Range 33 ~ 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current tan δ Stability at Low Temperature I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 0.20MAX. 120Hz, 20°C Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C 200 • 220 8 400 8 Measurement frequency : 120Hz Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Safety Performance Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of initial value 150% or less of initial specified value Initial specified value or less The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Rating Test conditions Voltage (V) Rated Capacitance (µF) Limited DC current Test voltage 330 C < 330 4A 200 330 C < 470 5 A 300VDC and 375VDC 470 C < 470 7A 330 C < 330 4A 220 330 C < 470 5 A 320VDC and 405VDC 470 C < 470 7A 330 C < 100 2A 400 100 C < 220 4 A 500VDC and 600VDC 220 C < 470 7A Printed with white color letter on black sleeve Drawing (BcoodtteomZBpolantley) Polarity bar Sleeve (P.E.T.) fD+1MAX. L±2 Pressure relief vent 10±0.1 10 4.0±0.5 0.8 +-00..12 0.8+-00..21 4.0±0.5 2.5 2-2 f±0.1 (PC board hole dimensions) 1.5 +-00..12 (Terminal dimensions) Type numbering system (Example : 200V 680µF) L1 A2 Q3 24 D5 66 87 18 M9 E10 1L1 A12 413 104 15 16 Configuration Capacitance tolerance (±20%) Rated Capacitance (680µF) Rated voltage (200V) Series name Type Case length code Case dia. code fD Code 22 Z 25 A 30 B 35 C Please contact to us if other configurations are required. Bottom Plate ZB code less WPWBloaiittthhtteooBmuotPttolamte Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100V ALUMI.


LAQ2G151MEL LAQ2G152MEL LAQ2G181MEL


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)