DatasheetsPDF.com

LAK2D271MEL Dataheets PDF



Part Number LAK2D271MEL
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet LAK2D271MEL DatasheetLAK2D271MEL Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, Permissible Abnormal Voltage, Wide Temperature Range series Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacit.

  LAK2D271MEL   LAK2D271MEL



Document
ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, Permissible Abnormal Voltage, Wide Temperature Range series Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Stability at Low Temperature Endurance Shelf Life Safety Performance Marking AQ Performance Characteristics – 25 ~ +105°C 200 • 400 • 420V 33 ~ 1200µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 0.20MAX. 120Hz 20°C Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C 200 8 400 • 420 8 Measurement frequency : 120Hz After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change Within ±20% of initial value tan δ 200% or less of initial specified value Leakage current Initial specified value or less After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change Within ±15% of initial value tan δ 150% or less of initial specified value Leakage current Initial specified value or less The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and/or case. rating test conditions Voltage (V) Capacitance (µF) Limited DC current Test voltage 330 C < 330 4A 200 330 C < 470 5 A 300VDC and 375VDC 470 C < 470 7A 330 C < 100 2A 400 100 C < 220 4 A 500VDC and 600VDC 220 C < 470 7A 330 C < 100 2A 420 100 C < 220 4 A 520VDC and 630VDC 220 C < 470 7A Printed with white color letter on black sleeve Drawing (BcoodtteomZBpolantley) Polarity bar Sleeve (P.E.T.) f D +1MAX. 4.0±0.5 2.5 L±2 Pressure relief vent 10±0.1 10 4.0±0.5 0.8 +-00..12 0.8+-00.2.1 2-2f±0.1 (PC board hole dimensions) 1.5+-00..12 (Terminal dimensions) Type numbering system (Example : 200V 680µF) L1 A2 K3 24 D5 66 87 18 M9 E10 1L1 1A2 153 104 15 16 Bottom Plate Configuration Capacitance tolerance (±20%) Rated Capacitance (680µF) Rated voltage (200V) Case length code Case dia. code fD Code ZB WPlaithteBottom code less WBoitthtoomutPlate 22 Z 25 A 30 B 35 C Series name Type Please contact to us if other configurations are required. Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS AK series Dimensions Cap.(µF) V(Code) Code φD 33 330 22 39 390 47 470 22 × 20 0.35 56 560 68 680 82 820 100 101 22 × 20 0.50 120 121 150 151 180 181 22 × 25 0.70 220 221 22 × 25 0.74 270 271 22 × 30 0.90 330 331 22 × 30 1.05 390 391 22 × 35 1.20 470 471 22 × 40 1.30 560 561 22 × 45 1.50 680 681 820 821 1000 102 1200 122 200V (2D) 25 30 25 × 20 0.65 30 × 20 0.70 25 × 25 0.85 25 × 30 1.05 25 × 30 1.20 25 × 35 1.30 25 × 40 1.50 25 × 50 1.70 30 × 25 1.05 30 × 25 1.20 30 × 25 1.35 30 × 35 1.55 30 × 40 1.70 30 × 45 1.99 30 × 50 2.10 35 35 × 20 1.10 35 × 25 1.55 35 × 30 1.70 35 × 35 1.99 35 × 40 2.10 35 × 50 2.30 22 22 × 20 0.22 22 × 20 0.30 22 × 25 0.35 22 × 25 0.38 22 × 25 0.40 22 × 30 0.50 22 × 35 0.55 22 × 40 0.60 22 × 45 0.70 22 × 50 0.80 400V (2G) 25 30 25 × 20 0.35 25 × 20 0.38 25 × 25 0.45 25 × 25 0.50 25 × 30 0.53 25 × 30 0.60 25 × 35 0.70 25 × 40 0.80 25 × 45 0.90 30 × 20 0.40 30 × 20 0.50 30 × 20 0.50 30 × 25 0.53 30 × 25 0.60 30 × 30 0.70 30 × 30 0.80 30 × 35 0.90 30 × 40 0.98 30 × 50 1.21 35 35 × 20 0.55 35 × 25 0.70 35 × 25 0.80 35 × 30 0.90 35 × 35 0.96 35 × 40 1.21 35 × 45 1.32 35 × 50 1.45 22 22 × 25 0.25 420V (W6) 25 30 35 22 × 25 0.35 22 × 25 0.38 22 × 30 0.45 22 × 35 0.64 22 × 40 0.69 22 × 45 0.75 25 × 25 0.45 25 × 30 0.64 25 × 30 0.69 25 × 35 0.75 25 × 40 0.82 25 × 45 0.90 30 × 25 0.69 30 × 30 0.75 30 × 30 0.82 30 × 35 0.90 30 × 40 1.00 30 × 45 1.10 35 × 25 0.75 35 × 25 0.82 35 × 30 0.90 35 × 35 1.00 35 × 40 1.10 35 × 45 1.20 Case size Rated φ D × L (mm) ripple Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 200V Coefficient 400 • 420V 50 0.85 0.88 60 0.88 0.90 120 1.00 1.00 1k 1.15 1.10 10k~ 1.20 1.15 CAT.8100V .


LAK2D221MEL LAK2D271MEL LAK2D330MEL


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)