Document
TENTATIVE
All information in this technical data sheet is tentative and subject to change without notice.
12.1” SVGA
TECHNICAL SPECIFICATION
AA121SL09
MITSUBISHI ELECTRIC Corp.
MITSUBISHI Confidential
(1/24)
Date: Feb.7,’08
AA121SL09_02_00
CONTENTS
No. Item -- COVER -- CONTENTS 1 APPLICATION 2 OVERVIEW 3 ABSOLUTE MAXIMUM RATINGS 4 ELECTRICAL CHARACTERISTICS 5 INTERFACE PIN CONNECTION 6 INTERFACE TIMING 7 BLOCK DIAGRAM 8 MECHANICAL SPECIFICATION 9 OPTICAL CHARACTERISTICS 10 RELIABILITY TEST CONDITION 11 OTHER FEATURE 12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Page 1 2 3 4 5
5, 6, 7 8, 9
10, 11, 12, 13 14
15, 16 17, 18, 19
20 21 22, 23, 24
MITSUBISHI Confidential
(2/24)
AA121SL09_02_00
1. APPLICATION
This specification applies to color TFT-LCD module, AA121SL09.
These specification papers are the proprietary product of Mitsubishi Electric Corporation (“MITSUBISHI) and include materials protected under copyright of MITSUBISHI. No part of this document may be reproduced in any form or by any means without the express written permission of MITSUBISHI.
MITSUBISHI does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of MITSUBISHI or of others.
MITSUBISHI classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product.
(1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage Medical equipment, safety equipment, transportation equipment, provided, however, that TFT-LCD is necessary to its operation.
(3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. MITSUBISHI should make a contract that stipulate apportionment of responsibilities between MITSUBISHI and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for “Standard Usage”, they should first contact MITSUBISHI sales representative for it's intended use in writing.
MITSUBISHI has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features.
MITSUBISHI assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document.
Please contact and consult a MITSUBISHI sales representative for any questions regarding this product.
MITSUBISHI Confidential
(3/24)
AA121SL09_02_00
2. OVERVIEW
AA121SL09 is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data, 800 × 600, 262k-color images are displayed on the 12.1” diagonal screen. Input power voltage is single 3.3V for LCD driving. The type of data and control signals are digital and transmitted via CMOS interface per Typ. 40 MHz clock cycle.
Inverter for backlight is not included in this module. General specifications are summarized in the following table:
ITEM Display Area (mm)
Number of Dots Pixel Pitch (mm) Color Pixel Arrangement
SPECIFICATION 246.0(H) × 184.5(V) (12.106-inch diagonal) 800 × 3 (H) × 600 (V)
0.3075 (H) × 0.3075 (V)
RGB vertical stripe
Display Mode
Normally white TN
Number of Color
262k
Luminance (cd/m2)
400
Wide Viewing Angle Technology
Optical Compensation Film
Surface Treatment
Anti-glare and hard-coating 3H
Viewing Angle (CR ≥ 10) Electrical Interface
−65∼65° (H) −75~45° (V) CMOS
Optimum Viewing Angle (Contrast ratio) Module Size (mm)
6 o’clock 280.0 (W) × 210.0 (H) × 12.0 (D)
Module Mass (g)
720
Backlight Unit
CCFL, 2-tubes, edge-light, replaceable
Characteristic value without any note is typical value.
MITSUBISHI Confidential
(4/24)
AA121SL09_02_00
3. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX
UNIT
Power Supply Voltage for LCD
VCC
−0.3
4.0
V
Logic Input Voltage
VI −0.3 6.0
V
Lamp Voltage
VL
0
2000
Vrms
Lamp Current
IL 0 18 mArms
Lamp Frequency
FL -- 100 kHz
Operation Temperature (Panel) Note 1,2) Top(Panel)
−20
70
°C
Operation Temperature (Ambient) Note 2) Top(Ambient)
−20
70
°C
Storage Temperature
Note 2)
Tstg
−20
80
°C
[Note]
1) Measured at the center of active area and at the center of panel back surface
2) Top,Tstg ≤ 40°C : 90%RH max. without condensatio.