LC717A00AR

Ordering number : ENA2048B CMOS LSI LC717A00AR Overview Capacitance-Digital-Converter LSI for Electrostatic Capacitive Touch Sensors The LC717A00AR is a high-performance, low-cost capacitance-digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability. It has 8 channels capacitance-sensor input. The built-in logic circuit can detect the state (ON/OFF) of each input and output the result. This makes it ideal for various switch applications. The calibration function is automatically performed by the built-in logic circuit during power activation or whenever there are environmental changes. In addition, since initial settings of parameters, such as gain, are configured, LC717A00AR can operate as stand-alone when the recommended switch pattern is applied. Also, since LC717A00AR has a serial interface compatible with I2C and SPI bus, parameters can be adjusted using external devices whenever necessary. Moreover, outputs of the 8-input capacitance data can be detected and measured as 8-bit data. Features Detection system: Differential capacitance detection (Mutual capacitance type) Input capacitance resolution: Can detect capacitance changes in the femto Farad order Measurement interval (8 differential inputs): 18ms (Typ) (at initial configuration), 3ms (Typ) (at minimum interval configuration) External components for measurement: Not required Current consumption: 320μA (Typ) (VDD = 2.8V), 740μA (Typ) (VDD = 5.5V) Supply voltage...