DatasheetsPDF.com

EETHC1V822HJ Dataheets PDF



Part Number EETHC1V822HJ
Manufacturers Panasonic
Logo Panasonic
Description Aluminum Electrolytic Capacitors
Datasheet EETHC1V822HJ DatasheetEETHC1V822HJ Datasheet (PDF)

Aluminum Electrolytic Capacitors/ HC Snap-in Type Series: HC Type: TS Discontinued ■ Features ● Endurance : 105 °C 2000 h ● 30 % smaller than series TS-HB ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d –40 °C to +105 °C 10 V.DC to 100 V.DC 160 V.DC to 250 V.DC 820 μF to 100000 μF 150 μF to 3300 μF ±20 % (120 Hz/+20 °C) –25 °C to +105 °C 315 V.DC to 450 V.DC 39 μF to 1000 μF 3√ CV (μA) max..

  EETHC1V822HJ   EETHC1V822HJ


Document
Aluminum Electrolytic Capacitors/ HC Snap-in Type Series: HC Type: TS Discontinued ■ Features ● Endurance : 105 °C 2000 h ● 30 % smaller than series TS-HB ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d –40 °C to +105 °C 10 V.DC to 100 V.DC 160 V.DC to 250 V.DC 820 μF to 100000 μF 150 μF to 3300 μF ±20 % (120 Hz/+20 °C) –25 °C to +105 °C 315 V.DC to 450 V.DC 39 μF to 1000 μF 3√ CV (μA) max. After 5 minutes application of rated working voltage at +20 °C. C : Capacitance (μF) V: W.V. (V.DC) Please see the attached standard products list After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105 °C±2 °C, the capacitors shall meet the following limits. Endurance Shelf Life Capacitance change < ±20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) ■ Frequency correction factor for ripple current Rated Voltage 10 V.DC to 100 V.DC /C.F. 160 V.DC to 450 V.DC /C.F. 50 0.93 0.75 60 0.95 0.80 100 0.99 0.95 Frequency (Hz) 120 1.00 1.00 500 1.05 1.20 1k 1.08 1.25 10 k to 1.15 1.40 (Unit : mm) Sleeve (1 0.0 ) ■ Dimensions in mm (not to scale) 2-02.0±0.1 Polarity bar 10 .0± 0.1 0D+1.0 max. Vent L+2.0 max. Rated voltage etc. indicate to sleeve. 4.0±0.5 (0D) Recommended PWB piercing plan 4.0±0.5 0.8 –0.1 +0.2 2.0 max. Terminal (t=0.8) (3.5) 1.5±0.2 Top of spin Standard terminal type does not require terminal trimming peocess. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-135 – Aluminum Electrolytic Capacitors/ HC ■ Standard Products W.V. Cap. (120 Hz) (±20 %) (μF) 12000 15000 18000 22000 27000 33000 10 39000 Discontinued Case size Dia. (mm) 22 22 22 25 22 25 22 25 30 22 25 25 30 35 25 30 35 30 35 30 35 35 35 22 22 25 22 22 25 22 25 30 22 25 30 35 25 30 30 35 30 35 30 35 35 Length (mm) 25 30 30 25 35 30 40 35 25 45 40 45 30 25 50 35 30 40 35 45 40 45 50 25 30 25 35 40 30 45 35 25 50 40 30 25 45 35 40 30 45 35 50 40 45 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETHC1A123HJ EETHC1A153HJ EETHC1A183HJ EETHC1A183JJ EETHC1A223HJ EETHC1A223JJ EETHC1A273HJ EETHC1A273JJ EETHC1A273KJ EETHC1A333HJ EETHC1A333JJ EETHC1A393JJ EETHC1A393KJ EETHC1A393LJ EETHC1A473JJ EETHC1A473KJ EETHC1A473LJ EETHC1A563KJ EETHC1A563LJ EETHC1A683KJ EETHC1A683LJ EETHC1A823LJ EETHC1A104LJ EETHC1C103HJ EETHC1C123HJ EETHC1C123JJ EETHC1C153HJ EETHC1C183HJ EETHC1C183JJ EETHC1C223HJ EETHC1C223JJ EETHC1C223KJ EETHC1C273HJ EETHC1C273JJ EETHC1C273KJ EETHC1C273LJ EETHC1C333JJ EETHC1C333KJ EETHC1C393KJ EETHC1C393LJ EETHC1C473KJ EETHC1C473LJ EETHC1C563KJ EETHC1C563LJ EETHC1C683LJ Specification Ripple tan d Current (120 Hz) (120 Hz) (+20 °C) (+105 °C) max. (A r.m.s.) 2.20 0.65 2.30 0.65 2.40 0.65 2.40 0.65 2.60 0.65 2.60 0.65 3.10 0.65 3.10 0.65 3.10 0.65 3.40 0.65 3.40 0.65 3.70 0.71 3.70 0.71 3.70 0.71 4.20 0.79 4.20 0.79 4.20 0.79 5.00 0.88 5.00 0.88 5.40 1.00 5.40 1.00 5.90 1.14 6.50 1.32 2.60 0.55 2.90 0.55 2.90 0.55 3.20 0.55 3.50 0.55 3.50 0.55 3.80 0.55 3.80 0.55 3.80 0.55 4.20 0.55 4.20 0.55 4.20 0.55 4.20 0.55 4.70 0.55 4.70 0.55 5.10 0.61 5.10 0.61 5.50 0.69 5.50 0.69 6.00 0.78 6.00 0.78 6.40 0.90 Endurance : 105 °C 2000 h Min. Packaging Q'ty (V. DC) 47000 56000 68000 ✽ ✽ 82000 100000 10000 12000 15000 18000 22000 16 27000 33000 39000 47000 56000 ✽ 68000 (pcs) 200 200 200 200 200 200 200 200 100 200 200 200 100 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 100 200 200 100 100 200 100 100 100 100 100 100 100 100 ✽When capacitors of 035×45L and 035×50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-136 – Aluminum Electrolytic Capacitors/ HC ■ Standard Products W.V. Cap. (120 Hz) (±20 %) (μF) 6800 8200 10000 12000 15000 Discontinued Case size Dia. (mm) 22 22 25 22 22 25 22 25 30 22 25 30 35 25 30 35 30 35 30 35 30 35 35 22 22 25 22 22 25 22 25 30 22 25 30 35 25 30 35 30 35 30 35 35 35 Length (mm) 25 30 25 35 40 30 45 35 25 50 40 30 25 45 35 30 40 35 45 40 50 45 50 25 30 25 35 40 30 45 35 25 50 40 30 25 45 35 30 40 35 45 40 45 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETHC1E682HJ EETHC1E822HJ EETHC1E822JJ EETH.


EETHC1V682HJ EETHC1V822HJ EETHC1V822JJ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)