NCP1392D

NCP1392B, NCP1392D High-Voltage Half-Bridge Driver with Inbuilt Oscillator The NCP1392B/D is a self−oscillating high voltage MOSFET driver primarily tailored for the applications using half bridge topology. Due to its proprietary high−voltage technology, the driver accepts bulk voltages up to 600 V. Operating frequency of the driver can be adjusted from 25 kHz to 480 kHz using a single resistor. Adjustable Brown−out protection assures correct bulk voltage operating range. An internal 100 ms or 12.6 ms PFC delay timer guarantee that the main downstream converter will be turned on in the time the bulk voltage is fully stabilized. The device provides fixed dead time which helps lowering the shoot−through current. Features Wide Operating Frequency Range − from 25 kHz to 480 kHz Minimum frequency adjust accuracy $3% Fixed Dead Time − 0.6 ms or 0.3 ms Adjustable Brown−out Protection for a Simple PFC Association 100 ms or 12.6 ms PFC Delay Timer Non−latched Enable Input Internal 16 V VCC Clamp Low Startup Current of 50 mA 1 A / 0.5 A Peak Current Sink / Source Drive Capability Operation up to 600 V Bulk Voltage Internal Temperature Shutdown SOIC−8 Package These are Pb−Free Devices Typical Applications Flat Panel Display Power Converters Low Cost Resonant SMPS High Power AC/DC Adapters for Notebooks Offline Battery Chargers Lamp Ballasts www.onsemi.com 8 1 SOIC−8 CASE 751 MARKING DIAGRAMS 8 1392x ALYWW G 1 1392x A L Y WW G = Specific Device C...