DatasheetsPDF.com

L170E3-5 Dataheets PDF



Part Number L170E3-5
Manufacturers AUO
Logo AUO
Description LCD
Datasheet L170E3-5 DatasheetL170E3-5 Datasheet (PDF)

Product Specifications 17.0” SXGA Color TFT-LCD Module Model Name: L170E3 EC: -5 (‹) Preliminary Specifications ( ) Final Specifications Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. January, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. L170E3-5 Ver0.2 1/24 i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Display Characteristics 2.2 Functional Block Diagram 2.3 Optical Characterist.

  L170E3-5   L170E3-5



Document
Product Specifications 17.0” SXGA Color TFT-LCD Module Model Name: L170E3 EC: -5 (‹) Preliminary Specifications ( ) Final Specifications Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. January, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. L170E3-5 Ver0.2 1/24 i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Display Characteristics 2.2 Functional Block Diagram 2.3 Optical Characteristics 2.4 Pixel format image 3.0 Electrical characteristics 3.1 Absolute Maximum Ratings 3.2 Connectors 3.3 Signal Pin 3.4 Signal Description 3.5 Signal Electrical Characteristics 3.6 Interface Timing 3.6.1 Timing Characteristics 3.6.2 Timing Definition 3.7 Power Consumption 3.8 Power ON/OFF Sequence 4.0 Backlight Characteristics 4.1 Signal for Lamp connector 4.2 Parameter guide line for CCFL Inverter 5.0 Vibration, shock and drop 5.1 Vibration and shock 5.2 Drop test 6.0 Environment 6.1 Temperature and humidity 6.1.1 Operating conditions 6.1.2 Shipping conditions 6.2 Atmospheric pressure 6.3 Thermal shock 7.0 Reliability 7.1 Failure criteria 7.2 Failure rate 7.2.1 Usage 7.2.2 Components de-rating 7.3 CCFL life 7.4 ON/OFF cycle 8.0 Safety 8.1 Sharp edge requirement 8.2 Material 8.2.1 Toxicity 8.2.2 Flammability 8.3 Capacitors 8.4 Hazardous voltage 9.0 Other requirements 9.1 Smoke free design 9.2 National test lab requirement 10.0 Mechanical Characteristics (C) Copyright AU Optronics, Inc. January, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. L170E3-5 Ver0.2 2/24 ii Record of Revision Version and Date Page 0.1. 2001/08/07 0.2. 2001/08/09 All 7 Old description First Edition for Customer TBD New Description All Note 1: The definition of Response time Add Remark 1.0 Handling Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT-LCD module. 10) After installation of the TFT-LCD module into an enclosure (LCD monitor housing, for example), do not twist nor bend the TFT -LCD module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT -LCD module from outside. Otherwise the TFT -LCD mod.


AGD070DCBAFNN-B L170E3-5 L141X1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)