CAP200

KILOVAC High Voltage DC Contactors KILOVAC CAP200 Series Contactor with 1 Form A (SPST-NO) Contacts Rated up to 500 Amps, 12-900 Vdc Product Facts n Performance Data Contact Arrangement, Power Contacts — 1 Form A (SPST-NO) Rated Operating Voltage — 12 - 900 VDC Continuous (Carry) Current, Typical — 500 A @ 85°C, 400 mcm conductors Consult Factory for required conductors for higher currents Make/Break Current at Various Voltages 1 — See graph next page Break Current at 320VDC 1 — 2,000 A, 1 cycle 3 Contact Resistance, Typ. (@200A) — 0.2 mohms Load Life — See graph next page Mechanical Life — 1 million cycles Contact Arrangement, Auxiliary Contacts — 1 Form A (SPST-NO) Aux. Contact Current, Max. — 2A @ 30VDC / 3A @ 125VAC Aux. Contact Current, Min. — 100mA @ 8V Aux. Contact Resistance, Max. — 0.417 ohms @ 30VDC / .150 ohms @ 125VAC Dielectric Withstanding Voltage — 2,200 Vrms @ sea level Insulation Resistance @ 500VDC — 100 megohms 2 Shock, 11ms 1/2 Sine, Peak, Operating — 20 G Vibration, Sine, 80-2000Hz., Peak — 20 G Operating Temperature — -40°C to +85°C Weight, Nominal — .95 lb. (.43 kg) Notes: 1 Main power contacts 2 50 at end of life 3 Does not meet dielectric & IR after test, 1700 amp for unit with Aux. Contacts Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating Built-in coil economizer — only 1.7W hold power @ 12VDC and it limits back EMF to 0V. (models requiring external economizer also available) Option...