www.vishay.com
SMA5J5.0A thru SMA5J40CA
Vishay General Semiconductor
High Power Density Surface-Mount TRANSZORB® Transient Voltage Suppressors
SMA (DO-214AC)
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
PRIMARY CHARACTERISTICS
VBR VWM PPPM IFSM (unidirectional only) TJ max. Polarity
6.4 V to 49.1 V 5.0 V to 40 V
500 W 40 A 150 °C Unidirectional, bidirectional
Package
SMA (DO-214AC)
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. SMA5J40CA). Electrical characteristics apply in both directions.
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional • Excellent clamping capability
Available
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
• AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test
Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1)
Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2)
Operating junction and storage temperature range
Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
SYMBOL PPPM IPPM IFSM
TJ, TSTG
VALUE 500
See next table 40
-55 to +150
UNIT W A A °C
Revision: 27-Sep-2021
1
Document Number: 88875
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
SMA5J5.0A thru SMA5J40CA
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE TYPE SMA5J5.0A (5)
DEVICE MARKING CODE
UNI
BI
5AE
5AE
BREAKDOWN VOLTAGE VBR (V) (1)
MIN. MAX.
6.40 7.07
TEST CURRENT
IT (mA)
10
STAND-OFF VOLTAGE VWM (V)
5.0
MAXIMUM REVERSE LEAKAGE
AT VWM ID (μA) (3)
800
SMA5J6.0A
5AG
5AG
6.67 7.37
10
6.0
800
SMA5J6.5A
5AK
5AK
7.22 7.98
10
6.5
500
SMA5J7.0A
5AM
5AM
7.78
8.60
10
7.0
200
SMA5J7.5A
5AP
5AP
8.33 9.21
1.0
7.5
100
SMA5J8.0A
5AR
5AR
8.89 9.83
1.0
8.0
50
SMA5J8.5A
5AT
5AT
9.44 10.4
1.0
8.5
10
SMA5J9.0A
5AV
5AV
10.0 11.1
1.0
9.0
5.0
SMA5J10A
5AX
5AX
11.1 12.3
1.0
10
1.0
SMA5J11A
5AZ
5AZ
12.2 13.5
1.0
11
1.0
SMA5J12A
5BE
5BE
13.3 14.7
1.0
12
1.0
SMA5J13A
5BG
5BG
14.4 15.9
1.0
13
1.0
SMA5J14A
5BK
5BK
15.6 17.2
1.0
14
1.0
SMA5J15A
5BM
5BM
16.7
18.5
1.0
15
1.0
SMA5J16A
5BP
5BP
17.8 19.7
1.0
16
1.0
SMA5J17A
5BR
5BR
18.9 20.9
1.0
17
1.0
SMA5J18A
5BT
5BT
20.0 22.1
1.0
18
1.0
SMA5J20A
5BV
5BV
22.2 24.5
1.0
20
1.0
SMA5J22A
5BX
5BX
24.4 26.9
1.0
22
1.0
SMA5J24A
5BZ
5BZ
26.7 29.5
1.0
24
1.0
SMA5J26A
5CE
5CE
28.9 31.9
1.0
26
1.0
SMA5J28A
5CG
5CG
31.1 34.4
1.0
28
1.0
SMA5J30A
5CK
5CK
33.3 36.8
1.0
30
1.0
SMA5J33A
5CM
5CM
36.7
40.6
1.0
33
1.0
SMA5J36A
5CP
5CP
40.0 44.2
1.0
36
1.0
SMA5J40A
5CR
5CR
44.4 49.1
1.0
40
1.0
Notes
(1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bidirectional types having VWM of 10 V and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bidirectional SMA5J5.0CA, the maximum VBR is 7.25 V (6) VF = 3.5 V at IF = 25 A (uni-directional only)
MAXIMUM PEAK PULSE
SURGE CURRENT IPPM (A) (2)
54.3 48.5 44.6 41.7 38.8 36.8 34.7 32.5 29.4 27.5 25.1 23.3 21.6 20.5 19.2 18.1 17.1 15.4 14.1 12.9 11.9 11.0 10.3 9.4 8.6 7.8
MAXIMUM CLAMPING VOLTAGE AT
IPPM VC (V)
9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5.