12 Channel Incremental Encoder Interface
Technical Manual CC133 12 Channel Incremental Encoder Interface With Isolated Inputs Version 1.2 February 1991
Chapter ...
Description
Technical Manual CC133 12 Channel Incremental Encoder Interface With Isolated Inputs Version 1.2 February 1991
Chapter 1
General Information
1.1
Introduction
This manual provides general information, instructions for preparation for use, installation instructions and theory of operation for the CC133 Incremental Encoder Interface for the VMEbus. The VMEbus board can determine the rotation or translation, direction and displacement of up to twelve mechanical devices or axis, based on two input signals from transducers in quadrature.
1.2
Features
The features of the CC133 module include: VMEbus
VMEbus slave interface (A16;D16) Flexible base address selection Interrupter I(1-7)DYN Selectable Address Modifier decoding Occupies 256 memory locations
Channel Grouping
4 independent groups of 3 channels each group has: a D25 front panel connector an interrupt level an interrupt vector a mode register a device reset register a DC/DC converter two CF32006 devices in a master/slave configuration each group is galvanically isolated from each other and from the system
Channel Configuration
2 quadrature inputs 1 index input 1 digital input 32 bit up/down counter
Technical Manual
Page 1-1
Compcontrol
General Information
CC133
direct digital input register change of state detection circuit interrupt mask register enable index register index status register
Input Signal Configuration
Differential, or Single Ended
1.3
...
Similar Datasheet