JCA0605S05

DC-DC 4/6 Watts JCA Series xppower.com Compact 1.0”x 0.8”Metal Package Industry Standard Pin Out 2:1 Input Range Single & Dual Outputs Operating Temperature -40 °C to +100 °C UL & TUV Approved 3 Year Warranty Specification Input Input Voltage Range Input Current Input Filter Input Surge Input Reflected Ripple 5 V (4.5-9.0 VDC), 12 V (9-18 VDC) 24 V (18-36 VDC), 48 V (36-75 VDC) See table Pi network 5 V models 10 V for 1 s max, 12 V models 25 V for 1 s max, 24 V models 50 V for 1 s max, 48 V models 100 V for 1 s max 80 mA for 5 V models 30 mA for all other models Output Output Voltage See table Initial Set Accuracy ±1% max Start Up Delay 200 ms max Start Up Rise Time 3.5 ms typical Minimum Load No minimum load required Line Regulation ±0.3% Load Regulation ±1% Cross Regulation ±5% on dual output models Transient Response 4% max deviation, recovery to within 1% in <500 µs for a 25% load change at 1 A/µs Ripple & Noise 50 mV pk-pk, 20 MHz bandwidth Overcurrent Protection 150% typical, trip & restart (hiccup mode) Short Circuit Protection Continuous with auto recovery Overvoltage Protection 150% typical, Recycle input to reset Temperature Coefficient ±0.05%/°C General Efficiency Isolation Switching Frequency Power Density MTBF See table 1500 VDC Input to Output, basic insulation 500 VDC Input to Case 500 VDC Output to Case 300 kHz typical JCA04: 12.5 W/in3, JCA06: 18.8 W/in3 1.0 MHrs to...