Four Channels Constant Current LED Driver
SP1821
Four Channels Constant Current LED Driver
DESCRIPTION The SP1821 is a linear constant current driver designed to ...
Description
SP1821
Four Channels Constant Current LED Driver
DESCRIPTION The SP1821 is a linear constant current driver designed to drive multiple LEDs in series from a high input voltage rail. The driver acts as a high current matched, four-channel current source ensuring constant LED current for a range of input voltages. The device can drive up to 25mA load current per string with an external resistor. The SP1821 can provide lowest cost for various applications. Internal thermal protection automatically turns off LED current to prevent overheating. The dimming can be achieved by controlling the ISET input or by feeding a PWM signal to the EN pin. The device can be shut down by setting Enable low. APPLICATIONS z MR16 and other decoration light source z General reading lighting z Display Backlight z 12V Battery powered devices
FEATURES z Low Cost LED Driver z Constant Current Output z Four Channels LED Driver Provides Matching LED Current z Low Quiescent Current z Disconnects LEDs in Shutdown Mode z Thermal Shut Down Protection z Current Adjustable via external resistor z Dimming Control thru either Enable or Iset
PIN CONFIGURATION(SOP – 8P)
PART MARKING
2010/04/10
Ver.2
Page 1
SP1821
Four Channels Constant Current LED Driver
TYPICAL APPLCATION CIRCUIT
PIN DESCRIPTION
Pin 1 2 3 4 5 6 7 8 Symbol VCC GND EN ISET LED1 LED2 LED3 LED4 Description Supply Voltage Input Ground High Enable Pin Current Set Input LED 1 LED 2 LED 3 LED 4
ORDERING INFORMATION Part Number SP1821S8RGB Package...
Similar Datasheet