HSMS-2855

Agilent HSMS-285x Series Surface Mount Zero Bias Schottky Detector Diodes Data Sheet Features Surface Mount SOT-23/ SOT-143 Packages Description Agilent’s HSMS-285x family of zero bias Schottky detector diodes has been designed and optimized for use in small signal (Pin < -20 dBm) applications at frequencies below 1.5 GHz. They are ideal for RF/ID and RF Tag applications where primary (DC bias) power is not available. Important Note: For detector applications with input power levels greater than –20 dBm, use the HSMS-282x series at frequencies below 4.0 GHz, and the HSMS-286x series at frequencies above 4.0 GHz. The HSMS-285x series IS NOT RECOMMENDED for these higher power level applications. Available in various package configurations, these detector diodes provide low cost solutions to a wide variety of design problems. Agilent’s manufacturing techniques assure that when two diodes are mounted into a single package, they are taken from adjacent sites on the wafer, assuring the highest possible degree of match. Pin Connections and Package Marking 1 2 3 6 5 4 Miniature SOT-323 and SOT-363 Packages High Detection Sensitivity: up to 50 mV/µW at 915 MHz Low Flicker Noise: -162 dBV/Hz at 100 Hz Low FIT (Failure in Time) Rate* Tape and Reel Options Available Matched Diodes for Consistent Performance Better Thermal Conductivity for Higher Power Dissipation Lead-free Option Available * For more information see the Surface Mount Schottky Reliability Data Sheet. ...