Website: www.kingtronics.com
Email:
[email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
SS12 THRU SS110
1.0AMP.SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIERS
Voltage Range 20 to 100 Volts Current 1.0Amperes
FEATURES
◆ For surface mounted application ◆ Easy pick and place ◆ Metal to silicon rectifier, majority carrier conduction ◆ Low power loss, high efficiency ◆ High current capability, low VF ◆ High surge current capability ◆ Plastic material used carriers Underwriters
SMA
Laboratory Classification 94V-0
◆ Epitaxial construction ◆ High temperature soldering: 260℃ / 10 seconds at terminals
MECHANICAL DATA
Case: molded plastic
Dimensions in inches and (millimeters)
Terminals: Solder plated Polarity : Indicated by cathode band Packaging: 12mm tape EIA STD RS-481 Weight: 0.074gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load, for capacitive load current derate by 20%.
Type Number
Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL(See Fig. 2) Peak Forward Surge Current,8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage (
[email protected] A Maximum DC Reverse Crrent @ TA=25℃ At Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note ) Operating Junction Temperature Range Storage Temperature Ranage
...
