Dual 4-Input Multiplexer
HD74AC153
Dual 4-Input Multiplexer
Description
The HD74AC153 is a high-speed dual 4-input multiplexer with common selec...
Description
HD74AC153
Dual 4-Input Multiplexer
Description
The HD74AC153 is a high-speed dual 4-input multiplexer with common select inputs and individual enable inputs for each section. It can select two lines of data from four sources. The two buffered outputs present data in the true (noninverted) form. In addition to multiplexer operation, the HD74AC153 can act as a function generator and generate any two functions of three variables.
Feature
Outputs Source/Sink 24 mA
Pin Arrangement
Ea 1 S1 2 I3a 3 I2a 4 I1a 5 I0a 6 Za 7 GND 8 (Top view)
16 VCC 15 Eb 14 S0 13 I3b 12 I2b 11 I1b 10 I0b 9 Zb
HD74AC153
Logic Symbol
Ea I0a I1a I2a I3a I0b I1b I2b I3b Eb S0 S1 Za Zb
Pin Names
I0a to I3a I0b to I3b S 0, S 1 Ea Eb Za Zb Side A Data Inputs Side B Data Inputs Common Select Inputs Side A Enable Input Side B Enable Input Side A Output Side B Output
Functional Description
The HD74AC153 is a dual 4-input multiplexer. It can select two bits of data from up to four sources under the control of the common Select inputs (S 0, S1). The two 4-input multiplexer circuits have individual active-Low Enables (Ea , Eb) which can be used to strobe the outputs independently. When the Enables ( Ea , Eb ) are High, the corresponding outputs (Za , Zb ) are forced Low. The HD74AC153 is the logic implementation of a 2-pole, 4-position switch, where the position of the switch is determined by the logic levels supplied to the two Select inputs. The logic equations for the outputs are shown below. Za = Ea ...
Similar Datasheet