DatasheetsPDF.com

HD74AC02 Dataheets PDF



Part Number HD74AC02
Manufacturers Hitachi Semiconductor
Logo Hitachi Semiconductor
Description Quad 2-Input NOR Gate
Datasheet HD74AC02 DatasheetHD74AC02 Datasheet (PDF)

HD74AC02 Quad 2-Input NOR Gate Feature • Outputs Source/Sink 24 mA Pin Arrangement 1 2 3 4 5 6 GND 7 (Top view) 14 VCC 13 12 11 10 9 8 DC Characteristics (unless otherwise specified) Item Maximum quiescent supply current Maximum quiescent supply current Symbol I CC I CC Max 40 4.0 Unit µA µA Condition VIN = VCC or ground, VCC = 5.5 V, Ta = Worst case VIN = VCC or ground, VCC = 5.5 V, Ta = 25°C HD74AC02 AC Characteristics Ta = +25°C CL = 50 pF Item Propagation delay Symbol t PLH VCC (V)*1 3.

  HD74AC02   HD74AC02



Document
HD74AC02 Quad 2-Input NOR Gate Feature • Outputs Source/Sink 24 mA Pin Arrangement 1 2 3 4 5 6 GND 7 (Top view) 14 VCC 13 12 11 10 9 8 DC Characteristics (unless otherwise specified) Item Maximum quiescent supply current Maximum quiescent supply current Symbol I CC I CC Max 40 4.0 Unit µA µA Condition VIN = VCC or ground, VCC = 5.5 V, Ta = Worst case VIN = VCC or ground, VCC = 5.5 V, Ta = 25°C HD74AC02 AC Characteristics Ta = +25°C CL = 50 pF Item Propagation delay Symbol t PLH VCC (V)*1 3.3 5.0 Propagation delay t PHL 3.3 5.0 Note: 1. Voltage Range 3.3 is 3.3 V ± 0.3 V Voltage Range 5.0 is 5.0 V ± 0.5 V Min 1.0 1.0 1.0 1.0 Typ 5.0 4.0 5.0 4.5 Max 7.5 6.0 7.5 6.5 Ta = –40°C to +85°C CL = 50 pF Min 1.0 1.0 1.0 1.0 Max 8.0 6.5 8.0 7.0 ns Unit ns Capacitance Item Input capacitance Power dissipation capacitance Symbol CIN CPD Typ 4.5 30.0 Unit pF pF Condition VCC = 5.5 V VCC = 5.0 V 2 Unit: mm 19.20 20.32 Max 14 8 6.30 7.40 Max 1 2.39 Max 1.30 7 7.62 0.51 Min 2.54 Min 5.06 Max 2.54 ± 0.25 0.48 ± 0.10 0.25 – 0.05 0° – 15° + 0.10 Hitachi Code JEDEC EIAJ Weight (reference value) DP-14 Conforms Conforms 0.97 g Unit: mm 10.06 10.5 Max 14 8 5.5 1 7 *0.22 ± 0.05 0.20 ± 0.04 2.20 Max 7.80 – 0.30 1.15 0° – 8° + 0.20 1.42 Max 1.27 *0.42 ± 0.08 0.40 ± 0.06 0.10 ± 0.10 0.70 ± 0.20 0.15 0.12 M Hitachi Code JEDEC EIAJ Weight (reference value) FP-14DA — Conforms 0.23 g *Dimension including the plating thickness Base material dimension Unit: mm 8.65 9.05 Max 14 8 3.95 1 1.75 Max 7 *0.20 ± 0.05 6.10 – 0.30 1.08 + 0.10 0.635 Max 0° – 8° 0.67 0.60 + – 0.20 1.27 *0.40 ± 0.06 0.11 0.14 + – 0.04 0.15 0.25 M Hitachi Code JEDEC EIAJ Weight (reference value) FP-14DN Conforms Conforms 0.13 g *Pd plating Unit: mm 5.00 5.30 Max 14 8 4.40 1 *0.22+0.08 –0.07 7 0.65 1.0 0.13 M 0.83 Max *0.17 ± 0.05 0.15 ± 0.04 1.10 Max 6.40 ± 0.20 0° – 8° 0.50 ± 0.10 0.20 ± 0.06 0.10 0.07 +0.03 –0.04 *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) TTP-14D — — 0.05 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. White.


HD74AC00 HD74AC02 HD74AC04


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)