2559

2559 UDx2559LB 1 16 PROTECTED QUAD POWER DRIVER Providing improved output current limiting, the UDK, UDN, and UDQ2559B, EB, and LB quad power drivers combine AND logic gates and high-current bipolar outputs with complete output protection. Each of the four outputs will sink 700 mA in the on state. The outputs have a minimum breakdown voltage (load dump) of 60 V and a sustaining voltage of 40 V. The inputs are compatible with TTL and 5 V CMOS logic systems. IN 4 IN3 ENABLE GROUND GROUND V CC IN 2 IN 1 Data Sheet 29317.14A UDx2559B OUT4 K OUT3 GROUND GROUND OUT2 K OUT1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 Over-current protection for each channel has been designed into these devices and is activated at approximately 1 A. It protects each output from short circuits with supply voltages up to 25 V. When an output current trip point is reached, that output stage is driven linearly resulting in a reduced output current level. If an over-current or shortcircuit condition continues, the thermal-limiting circuits will first sense the rise in junction temperature and then the rise in chip temperature, further decreasing the output current. Under worst-case conditions, these devices will tolerate short circuits on all outputs, simultaneously. These devices can be used to drive various loads including incandescent lamps (without warming or limiting resistors) or inductive loads such as relays, solenoids, or dc stepping motors. The suffix ‘B’ devices are 16-pin power DIPs, the suffix...