V23086-Ux011

PCB Relays Single Relays Micro Relay K SMD (Standard – Open Vent Hole) Catalog 1308028-2 Revised 3-2008 Features – Small power relay for surface mounted technology – Limiting continuous current 30 A – Minimal weight – Low noise operation – Relay designed for convection and infrared reflow soldering – Standard SMD and SMD with open vent hole versions – For twin version refer to Double Micro Relay K SMD – For latching (bistable) version refer to Micro Relay K Latching – For through hole technology refer to Micro Relay K Typical Applications – – – – – – – – – – Car alarm Door control Door lock Hazard warning signal Immobilizer Interior lights Seat control Sun roof Window lifter Wiper control 86M1_3D1 Please contact Tyco Electronics for relay application support. Design – ELV/RoHS/WEEE compliant – SMD (standard): sealed type washable – SMD (open vent hole): sealed type open vent hole Terminals SMD terminals for assembly on printed circuit boards Conditions All parametric, environmental and endurance tests are performed according to EIA Standard RS-407-A at standard test conditions unless otherwise noted: 23°C ambient temperature, 20 - 50% RH, 998.9 ±33.9 hPa. For general storage and processing recommendations please refer to our Application Notes and especially to Storage in the “Glossary” page 23 or at http://relays.tycoelectronics.com/ appnotes/ Weight Approx. 4 g (0.14 oz.) Nominal Voltage 12 V Disclaimer All technical performance data apply to the relay as such, sp...