Noise Diodes
Data Sheet
NC 100/200/300/400 Series 0.1 Hz to 110 GHz
Count on the noise leader
http://www.Datasheet4U.com
Noise Diod...
Description
Data Sheet
NC 100/200/300/400 Series 0.1 Hz to 110 GHz
Count on the noise leader
http://www.Datasheet4U.com
Noise Diodes
Noisecom’s noise diodes are the fundamental building blocks of all noise systems. They are hand-picked for performance characteristics that make them ideally suited to broadband noise generation with flat response.
The NC100 and NC200 Series diodes are designed for audio and RF applications. The NC300 and NC400 Series diodes are designed for microwave applications in which a 50-ohm impedance is required.
All Noisecom noise diodes deliver symmetrical white Gaussian noise and flat output power versus frequency. The diodes are hermetically sealed and available in a wide variety of package styles. Special package configurations or screening processes are available upon request.
Typical small signal impedance of the NC300 and NC400 Series is 10-20 ohms after a diode is biased. The output level is higher at low frequencies with low currents and driving the diodes with higher current results in greater output at higher frequencies.
Audio & VHF Types
Model
NC101 NC102 NC103 NC104 NC201 NC202 NC203
Frequency Range
0.1 Hz - 100 kHz 0.1 Hz - 500 kHz 0.1 Hz - 1 MHz 0.1 Hz - 3 MHz 0.1 Hz - 10 MHz 0.1 Hz - 25 MHz 0.1 Hz - 100 MHz
Operating Conditions
Vb (V) 7 - 10
Iop 30 - 60 μA
RL (Ω) 2200
7 - 10 30 - 60 μA 2200
7 - 10 30 - 60 μA 2200
7 - 10 30 - 60 μA 2200
7 - 10 0.2 - 0.5 mA 2200
7 - 10 0.2 - 0.5 mA 2200
7 - 10 0.2 - 0.5 mA 50
Minimum Output (μV/ √...
Similar Datasheet