Multilayer Chip Band Pass Filters
(1/2)
Multilayer Chip Band Pass Filters For 5.0GHz W-LAN
DEA Series DEA255375BT-2076A1
SHAPES AND DIMENSIONS
2.5±0.2 3 ...
Description
(1/2)
Multilayer Chip Band Pass Filters For 5.0GHz W-LAN
DEA Series DEA255375BT-2076A1
SHAPES AND DIMENSIONS
2.5±0.2 3 0.5± 0.2 1.0max.
Conformity to RoHS Directive
1
2
0.2±0.1
0.25±0.15
4
Terminal functions 1 IN 2 OUT 3 GND 4 GND Dimensions in mm
RECOMMENDED PC BOARD PATTERNS LAND
2.3 1.1 0.4
2± 0.2
SOLDER RESIST
2.0 1.9
0.3
0.6
0.3 0.55
0.8
2.3
0.4
1.4
0.3 Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness.
0.6
Dimensions in mm Solder resist
0.3 Land
0.6 Dimensions in mm
ELECTRICAL CHARACTERISTICS
Item Center frequency Insertion loss VSWR Ripple in Pass Band Attenuation Temperature range Ta:+25°C [25°C] [–40 to +85°C] [25°C] [–40 to +85°C] [5375MHz] [4900 to 5850MHz] [4900 to 5850MHz] [4900 to 5850MHz] [4900 to 5850MHz] [824 to 1910MHz] [9880 to 11700MHz] Operating Storage Minimum value — — — — — 50 15 –40 –40 Typical value — — — — — — — — — Maximum value — 1.2 1.5 2.0 1.0 — — +85 +85
(dB) (dB) (dB) (dB) (dB) (°C) (°C)
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. All specifications are subject to change without notice.
http://www.Datasheet4U.com
001-02 / 20130901 / rf_bpf_dea255375bt-2076a1_en.fm
0.6
(2/2)
FREQUENCY CHARACTERISTICS INSERTION LOSS
0 1: 4.9GHz –0.2 –0.70dB –0.4 2: 5.375GHz –...
Similar Datasheet