DatasheetsPDF.com

SLA24C32 Dataheets PDF



Part Number SLA24C32
Manufacturers Siemens
Logo Siemens
Description 32 Kbit (4096 x 8 bit) Serial CMOS-EEPROM
Datasheet SLA24C32 DatasheetSLA24C32 Datasheet (PDF)

Standard EEPROM ICs SLx 24C32 32 Kbit (4096 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus Data Sheet Preliminary 1998-07-27 http://www.Datasheet4U.com/ SLx 24C32 Revision History: Previous Version: Page Page (in previous (in current Version) Version) 3 11, 12 21 24 24 I2C Bus Current Version: Preliminary 1998-07-27 02.98, 04.98 Subjects (major changes since last revision) 3 11, 13 21 24 24 Text was changed to “Typical programming time 5 ms for up to 32 bytes”. The erase/write.

  SLA24C32   SLA24C32


Document
Standard EEPROM ICs SLx 24C32 32 Kbit (4096 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus Data Sheet Preliminary 1998-07-27 http://www.Datasheet4U.com/ SLx 24C32 Revision History: Previous Version: Page Page (in previous (in current Version) Version) 3 11, 12 21 24 24 I2C Bus Current Version: Preliminary 1998-07-27 02.98, 04.98 Subjects (major changes since last revision) 3 11, 13 21 24 24 Text was changed to “Typical programming time 5 ms for up to 32 bytes”. The erase/write cycle is finished latest after 10 8 ms. The write or erase cycle is finished latest after 10 4 ms. The line “erase/write cycle” was removed. Chapter 8.4 “Erase and Write Characteristics” has been added. Purchase of Siemens I2C components conveys the license under the Philips I2C patent to use the components in the I2C system provided the system conforms to the I2C specifications defined by Philips. Edition Preliminary 1998-07-27 Published by Siemens AG, Bereich Halbleiter, MarketingKommunikation, Balanstraße 73, 81541 München © Siemens AG 1998. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies and Representatives worldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Siemens Office, Semiconductor Group. Siemens AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems2 with the express written approval of the Semiconductor Group of Siemens AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. http://www.Datasheet4U.com/ 32 Kbit (4096 × 8 bit) Serial CMOS EEPROMs, I2C Synchronous 2-Wire Bus SLx 24C32 Preliminary Features • Data EEPROM internally organized as 4096 bytes and 128 pages × 32 bytes • Page Protection Mode for protecting the EEPROM against unintended data changes (SLx 24C32.../P types only) • Low power CMOS • VCC = 2.7 to 5.5 V operation • Two wire serial interface bus, I2C-Bus compatible • Three chip select pins to address 8 devices • Filtered inputs for noise suppression with Schmitt trigger • Clock frequency up to 400 kHz • High programming flexibility – Internal programming voltage – Self timed programming cycle including erase – Byte-write and page-write programming, between 1 and 32 bytes – Typical programming time 5 ms for up to 32 bytes • High reliability – Endurance 106 cycles1) – Data retention 40 years1) – ESD protection 4000 V on all pins • 8 pin DIP/DSO packages • Available for extended temperature ranges – Industrial: − 40 °C to + 85 °C – Automotive: − 40 °C to + 125 °C P-DIP-8-4 P-DSO-8-3 1) Values are temperature dependent, for further information please refer to your Siemens sales office. Semiconductor Group 3 Preliminary 1998-07-27 http://www.Datasheet4U.com/ SLx 24C32 Ordering Information Type SLA 24C32-D SLA 24C32-D/P SLA 24C32-S SLA 24C32-S/P SLA 24C32-D-3 SLA 24C32-D-3/P SLA 24C32-S-3 SLA 24C32-S-3/P SLE 24C32-D SLE 24C32-D/P SLE 24C32-S SLE 24C32-S/P Ordering Code Q67100-H3746 Q67100-H3752 Q67100-H3748 Q67100-H3753 Q67100-H3747 Q67100-H3754 Q67100-H3749 Q67100-H3769 Q67100-H3235 Q67100-H3755 Q67100-H3236 Q67100-H3756 Package P-DIP-8-4 Temperature Voltage – 40 °C … + 85 °C 4.5 V...5.5 V P-DSO-8-3 – 40 °C … + 85 °C 4.5 V...5.5 V P-DIP-8-4 – 40 °C … + 85 °C 2.7 V...5.5 V P-DSO-8-3 – 40 °C … + 85 °C 2.7 V...5.5 V P-DIP-8-4 – 40°C … + 125 °C 4.5 V...5.5 V P-DSO-8-3 – 40°C … + 125 °C 4.5 V...5.5 V Other types are available on request: – Temperature range (– 55 °C … + 150 °C) – Package (die, wafer delivery) – 3V.


SLA24C164 SLA24C32 SLA24C64


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)