DatasheetsPDF.com

MAX4531 Dataheets PDF



Part Number MAX4531
Manufacturers Maxim
Logo Maxim
Description CMOS Analog Multiplexers/Switches
Datasheet MAX4531 DatasheetMAX4531 Datasheet (PDF)

19-1162; Rev 0a; 12/96 Low-Voltage, CMOS Analog Multiplexers/Switches with Enable Inputs and Address Latching General Description The MAX4530/MAX4531/MAX4532 are low-voltage, CMOS analog ICs configured as an 8-channel multiplexer (mux) (MAX4530), two 4-channel muxes (MAX4531), and three single-pole/double-throw switches (MAX4532). These devices are pin compatible with the industry-standard 74HC4351/74HC4352/ 74HC4353. All devices have two complementary switch-enable inputs and address latching..

  MAX4531   MAX4531


Document
19-1162; Rev 0a; 12/96 Low-Voltage, CMOS Analog Multiplexers/Switches with Enable Inputs and Address Latching General Description The MAX4530/MAX4531/MAX4532 are low-voltage, CMOS analog ICs configured as an 8-channel multiplexer (mux) (MAX4530), two 4-channel muxes (MAX4531), and three single-pole/double-throw switches (MAX4532). These devices are pin compatible with the industry-standard 74HC4351/74HC4352/ 74HC4353. All devices have two complementary switch-enable inputs and address latching. The MAX4530/MAX4531/MAX4532 operate from a single supply of +2V to +12V, or from dual supplies of ±2V to ±6V. On-resistance (150 Ω max) is matched between switches to 8Ω max. Each switch can handle rail-to-rail analog signals. Off-leakage current is only 1nA at TA = +25°C and 50nA at TA = +85°C. All digital inputs have 0.8V and 2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using ±5V or a single +5V supply. ____________________________Features o Pin Compatible with 74HC4351/74HC4352/74HC4353 o ±2.0V to ±6V Dual Supplies +2.0V to +12V Single Supply o 75Ω Signal Paths with ±5V Supplies 150Ω Signal Paths with +5V Supply o Rail-to-Rail® Signal Handling o tON and tOFF = 150ns and 120ns at ±4.5V o <1µW Power Consumption o >2kV ESD Protection per Method 3015.7 o TTL/CMOS-Compatible Inputs o Small, 20-Pin SSOP/SO/DIP Packages MAX4530/MAX4531/MAX4532 ________________________Applications Battery-Operated Equipment Data Acquisition Test Equipment Avionics Networking ATE Equipment Audio-Signal Routing Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. PART MAX4530CPP MAX4530CWP MAX4530CAP MAX4530C/D Ordering Information TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C PIN-PACKAGE 20 Plastic DIP 20 SO 20 SSOP Dice* Ordering Information continued at end of data sheet. *Contact factory for availability. Pin Configurations TOP VIEW NO1 1 NO3 2 N.C. 3 COM 4 NO7 5 NO5 6 EN1 7 EN2 8 V- 9 GND 10 LOGIC 20 V+ 19 NO2 18 NO4 17 NO0 16 NO6 15 ADDC 14 N.C. 13 ADDB 12 ADDA NO0B 1 NO1B 2 N.C. 3 COMB 4 NO3B 5 NO2B 6 EN1 7 EN2 8 LOGIC 20 V+ 19 NO1A 18 NO2A 17 COMA 16 NO0A 15 NO3A 14 N.C. 13 ADDB 12 ADDA NOB 1 NCB 2 N.C. 3 NOA 4 COMA 5 NCA 6 EN1 7 EN2 8 V- 9 GND 10 LOGIC 20 V+ 19 COMB 18 COMC 17 NOC 16 NCC 15 ADDC 14 N.C. 13 ADDB 12 ADDA V- 9 GND 10 MAX4530 11 LE MAX4531 11 LE MAX4532 11 LE NARROW DIP/WIDE SO N.C. = NOT CONNECTED NARROW DIP/WIDE SO NARROW DIP/WIDE SO Truth Table appears at end of data sheet. 1 ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. http://www.Datasheet4U.com Low-Voltage, CMOS Analog Multiplexers/Switches with Enable Inputs and Address Latching MAX4530/MAX4531/MAX4532 ABSOLUTE MAXIMUM RATINGS Voltages Referenced to VV+ .............................................................................-0.3 to +13V Voltage into Any Terminal (Note 1) .................-0.3 to (V+ + 0.3V) or ±20mA (whichever occurs first) Continuous Current into Any Terminal..............................±20mA Peak Current, NO, NC, or COM_ (pulsed at 1ms, 10% duty cycle)...................................±40mA ESD per Method 3015.7 ..................................................>2000V Continuous Power Dissipation (TA = +70°C) 20-Pin Plastic DIP (derate 11.11mW/°C above +70°C)................................................................889mW 20-Pin SO (derate 10.00mW/°C above +70°C).............800mW 20-Pin SSOP (derate 8.00mW/°C above +70°C) ..........640mW Operating Temperature Ranges MAX453_C_P .......................................................0°C to +70°C MAX453_E_P ....................................................-40°C to +85°C Storage Temperature Range .............................-65°C to +150°C Note 1: Voltages exceeding V+ or V- on any signal terminal are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS—Dual Supplies (V+ = +5V ±10%, V- = -5V ±10%, GND = 0, VADD_H = VEN_H = V LE = 2.4V, VADD_L = VEN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SWITCH Analog-Signal Range Channel On-Resistance On-Resistance Matching Between Channels (Note 4) On-Resistance Flatness (Note 5) NO-Off Leakage Current (Note 6) VCOM, VNO, (Note 3) VNC_ RON ∆RON RFLAT(ON) INO(OFF) INO = 2mA, VCOM = ±3.5V, V+ = +4.5V, V- = -4.5V INO = 2mA, VCOM = ±4.5V, V+ = +4.5V, V- = -4.5V TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN.


MAX4527 MAX4531 MAX4532


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)