LHU30BS

LCD-Monitor Chassis Model LHU30BS 305TPLUS SERVICE LCD Monitor Manual Fashion Feature - Back Side cable management - Silm / Narrow Design - PCB: 2 Layer, 150mm x 100mm - Connectivity: DVI-D, USB 2.0 (1up, 4down) - Power consumption: 130W - Built in power supply Free Datasheet http://www.Datasheet4U.com -This Service Manual is a property of Samsung Electronics Co., Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law. Samsung Electronics Co.,Ltd. 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, Korea, 443-742 Printed in Korea P/N : BN82-00169A-01 URL : http://itself.sec.samsung.co.kr/ Free Datasheet http://www.Datasheet4U.com 3 Alignments and Adjustments 3 Alignments and Adjustments This section of the service manual explains how to use the RS232 JIG. This function is needed for AD board change and program memory (IC200) change. 3-1 Required Equipment The following equipment is necessary for adjusting the monitor: Computer with Windows 95, Windows 98, or Windows NT. MTI-2055 DDC MANAGER JIG 3-2 DDC EDID Data Input 1. Input DDC EDID data when replacing AD PCB. 2. Receive/Download the proper DDC file for the model from HQ quality control department. Install the below jig (Figure 1) and enter the data. MTI-2055 DDC Manager Parallel Connector (25P Cable) Connect Monitor (Signal Cable) Figure 1. 3-3 Hidden Key list 3-1 Free Datasheet http://www.Datasheet4U.com 3 Alignments and Adjustments 3-4 EDID Installat...