DatasheetsPDF.com

MIWI06-48S24 Dataheets PDF



Part Number MIWI06-48S24
Manufacturers Minmax
Logo Minmax
Description DC/DC CONVERTER
Datasheet MIWI06-48S24 DatasheetMIWI06-48S24 Datasheet (PDF)

® MIWI06 SERIES DC/DC CONVERTER 6W, DIP-Package FEATURES ► DIP-24 Plastic Package ► Ultra-wide 4:1 Input Range ► High Efficiency up to 84% ► Operating Temp. Range -40°C to +85°C ► Overload Protection ► I/O-isolation 1500VDC ( opt. 3000VDC) ► Input Filter meets EN 55022,class A and FCC, level A ► 3 Years Product Warranty PRODUCT OVERVIEW The MINMAX MIWI06 series is a new range of high performance dc-dc converter modules with 6W output power, featuring ultra-wide 4:1 input voltage ranges and ti.

  MIWI06-48S24   MIWI06-48S24



Document
® MIWI06 SERIES DC/DC CONVERTER 6W, DIP-Package FEATURES ► DIP-24 Plastic Package ► Ultra-wide 4:1 Input Range ► High Efficiency up to 84% ► Operating Temp. Range -40°C to +85°C ► Overload Protection ► I/O-isolation 1500VDC ( opt. 3000VDC) ► Input Filter meets EN 55022,class A and FCC, level A ► 3 Years Product Warranty PRODUCT OVERVIEW The MINMAX MIWI06 series is a new range of high performance dc-dc converter modules with 6W output power, featuring ultra-wide 4:1 input voltage ranges and tight output voltage regulation. The product comes in a DIP-24 package with industry standard footprint. Excellent efficiency allows an operation temperature range of -40°C to +85°C . Standard features include overload protection. Typical applications for these cost optimized converters are battery powered equipment, instrumentation, datacom and industrial electronics. Model Selection Guide Model Number Input Voltage (Range) VDC MIWI06-24S033 MIWI06-24S05 MIWI06-24S12 MIWI06-24S15 MIWI06-24S24 MIWI06-24D05 MIWI06-24D12 MIWI06-24D15 MIWI06-48S033 MIWI06-48S05 MIWI06-48S12 MIWI06-48S15 MIWI06-48S24 MIWI06-48D05 MIWI06-48D12 MIWI06-48D15 VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 Output Voltage Output Current Max. mA 1200 1200 500 400 250 ±500 ±250 ±200 1200 1200 500 400 250 ±500 ±250 ±200 @Max. Load mA(typ.) 214 313 298 298 298 260 298 298 107 156 149 149 149 130 149 149 @No Load mA(typ.) Input Current Reflected Ripple Current mA(typ.) uF 470 470 100 100 47 100# 100# 100# 470 470 100 100 47 100# 100# 100# # For each output Max. capacitive Load Efficiency (typ.) @Max. Load % 77 80 84 84 84 80 84 84 77 80 84 84 84 80 84 84 24 (9 ~ 36) 20 20 48 (18 ~ 75) 10 15 Input Specifications Parameter Input Surge Voltage (1 sec. max.) Start-Up Voltage Under Voltage Shutdown Short Circuit Input Power Internal Power Dissipation Conducted EMI All Models Model 24V Input Models 48V Input Models 24V Input Models 48V Input Models 24V Input Models 48V Input Models Min. -0.7 -0.7 7 14 --------Typ. ----8 16 --------Max. 50 100 9 18 8.5 16 3000 2500 mW mW VDC Unit Compliance to EN 55022,class A and FCC part 15,class A E-mail:[email protected] Tel:886-6-2923150 2012/02/02 REV:6 Page 1 of 4 Free Datasheet http://www.datasheetlist.com/ ® MIWI06 SERIES DC/DC CONVERTER 6W, DIP-Package Output Specifications Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Min.Load Ripple & Noise (20MHz) Ripple & Noise (20MHz) Transient Recovery Time Transient Response Deviation Temperature Coefficient Over Load Protection Short Circuit Protection Foldback Over Line, Load & Temp. 25% Load Step Change Dual Output, Balanced Loads Vin=Min. to Max. Io=0% to 100% Conditions Min. ------------------110 Continuous Typ. ±1.0 ±1.0 ±0.1 ±0.6 50 --300 ±3 ±0.01 150 Max. ±2.0 ±2.0 ±0.5 ±1.2 80 100 600 --±0.02 --Unit % % % % mV P-P mV P-P uS % %/℃ % No minimum Load Requirement General Specifications Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated) Safety Approvals(pending) MIL-HDBK-217F@25℃, Ground Benign Conditions 60 Seconds 500 VDC 100KHz, 1V Standard Suffix H (note 6) Min. 1500 3000 1000 ----800,000 Typ. ------1000 330 --Max. ------------Unit VDC VDC MΩ pF KHz Hours UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1(CB-scheme) Input Fuse 24V Input Models 1500mA Slow-Blow Type 48V Input Models 800mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. -40 ---50 --Free-Air convection --260 ℃ Max. +85 +100 +125 95 Unit ℃ ℃ ℃ % rel. H Power Derating Curve Output Power (%) (3.3 & 5V Output Models) Output Power (%) (Other Output Models) E-mail:[email protected] Tel:886-6-2923150 2012/02/02 REV:6 Page 2 of 4 Free Datasheet http://www.datasheetlist.com/ ® MIWI06 SERIES DC/DC CONVERTER 6W, DIP-Package Notes 1 2 3 4 5 6 7 8 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100% Ripple & Noise measurement bandwidth is 0-20MHz. All DC/DC converters should be externally fused at the front end for protection. Other input and output voltage may be available, please contact factory. To order the converter at 3KVDC isolation, please add a suffix H (e.g. MIWI06-24S05H) to order code. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications subject to change without notice. Package Specifications Mechanical Dimensions Pin Connections Pin 10.2 [0.40] Single Output -Vin -Vin No Pin NC +Vout -Vout +Vin +Vin NC: No Connection Dual Output -Vin -Vin Common -Vout +Vout Common +Vin +Vin 2 3 9 11 4.1 [0.16] 0.50 [0.02] 14 16 .


MIWI06-48S15 MIWI06-48S24 MIWI06-48D05


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)