®
MIWI06 SERIES
DC/DC CONVERTER 6W, DIP-Package
FEATURES
► DIP-24 Plastic Package ► Ultra-wide 4:1 Input Range ► High Efficiency up to 84% ► Operating Temp. Range -40°C to +85°C ► Overload Protection ► I/O-isolation 1500VDC ( opt. 3000VDC) ► Input Filter meets EN 55022,class A and FCC, level A ► 3 Years Product Warranty
PRODUCT OVERVIEW
The MINMAX MIWI06 series is a new range of high performance dc-dc converter modules with 6W output power, featuring ultra-wide 4:1 input voltage ranges and tight output voltage regulation. The product comes in a DIP-24 package with industry standard footprint. Excellent efficiency allows an operation temperature range of -40°C to +85°C . Standard features include overload protection. Typical applications for these cost optimized converters are battery powered equipment, instrumentation, datacom and industrial electronics.
Model Selection Guide
Model Number Input Voltage (Range) VDC MIWI06-24S033 MIWI06-24S05 MIWI06-24S12 MIWI06-24S15 MIWI06-24S24 MIWI06-24D05 MIWI06-24D12 MIWI06-24D15 MIWI06-48S033 MIWI06-48S05 MIWI06-48S12 MIWI06-48S15 MIWI06-48S24 MIWI06-48D05 MIWI06-48D12 MIWI06-48D15 VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 Output Voltage Output Current Max. mA 1200 1200 500 400 250 ±500 ±250 ±200 1200 1200 500 400 250 ±500 ±250 ±200 @Max. Load mA(typ.) 214 313 298 298 298 260 298 298 107 156 149 149 149 130 149 149 @No Load mA(typ.) Input Current Reflected Ripple Current mA(typ.) uF 470 470 100 100 47 100# 100# 100# 470 470 100 100 47 100# 100# 100# # For each output Max. capacitive Load Efficiency (typ.) @Max. Load % 77 80 84 84 84 80 84 84 77 80 84 84 84 80 84 84
24 (9 ~ 36)
20
20
48 (18 ~ 75)
10
15
Input Specifications
Parameter Input Surge Voltage (1 sec. max.) Start-Up Voltage Under Voltage Shutdown Short Circuit Input Power Internal Power Dissipation Conducted EMI All Models Model 24V Input Models 48V Input Models 24V Input Models 48V Input Models 24V Input Models 48V Input Models Min. -0.7 -0.7 7 14 --------Typ. ----8 16 --------Max. 50 100 9 18 8.5 16 3000 2500 mW mW VDC Unit
Compliance to EN 55022,class A and FCC part 15,class A
E-mail:
[email protected]
Tel:886-6-2923150
2012/02/02 REV:6
Page 1 of 4
Free Datasheet http://www.datasheetlist.com/
®
MIWI06 SERIES
DC/DC CONVERTER 6W, DIP-Package
Output Specifications
Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Min.Load Ripple & Noise (20MHz) Ripple & Noise (20MHz) Transient Recovery Time Transient Response Deviation Temperature Coefficient Over Load Protection Short Circuit Protection Foldback Over Line, Load & Temp. 25% Load Step Change Dual Output, Balanced Loads Vin=Min. to Max. Io=0% to 100% Conditions Min. ------------------110 Continuous Typ. ±1.0 ±1.0 ±0.1 ±0.6 50 --300 ±3 ±0.01 150 Max. ±2.0 ±2.0 ±0.5 ±1.2 80 100 600 --±0.02 --Unit % % % % mV P-P mV P-P uS % %/℃ %
No minimum Load Requirement
General Specifications
Parameter I/O Isolation Voltage (rated) I/O Isolati.