SP6T LTE Transmit/Receive Switch
DATA SHEET
SKY13526-485LF: 0.4 to 2.7 GHz SP6T LTE Transmit/Receive Switch with MIPI RFFE Interface
Applications
2G/3...
Description
DATA SHEET
SKY13526-485LF: 0.4 to 2.7 GHz SP6T LTE Transmit/Receive Switch with MIPI RFFE Interface
Applications
2G/3G/4G multimode cellular tablets and handsets (LTE, UMTS, CDMA2000, EDGE)
Embedded data cards
Features
Broadband frequency range: 0.4 to 2.7 GHz Low insertion loss High isolation and linearity External MIPI select pin Six linear TRX ports with isolation greater than 20 dB
@ 2.7 GHz Small QFN (14-pin, 2 x 2 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
VDD VIO SDATA SCLK MIPI_SELECT
S3464
TRX1 TRX2 TRX3
ANT TRX4 TRX5 TRX6
MIPI Decoder
Figure 1. SKY13526-485LF Block Diagram
Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074.
Description
The SKY13526-485LF is a single-pole, six-throw (SP6T) antenna switch with a Mobile Industry Processor Interface (MIPI).
Using advanced switching technologies, the SKY13526-485LF maintains low insertion loss and high isolation for both transmit and receive switching paths. The high linearity performance and low insertion loss achieved by the SKY13526-485LF makes it an ideal choice for UMTS, CDMA2000, EDGE, and LTE applications.
Depending on the logic applied to the decoder, the antenna pin is connected to one of six switched RF ports using a low insertion loss path, while the paths between the antenna pin and the other RF pins are in a high isolation state. Switching is contro...
Similar Datasheet