SAW Filter
Preliminary
®
SF2112D 452.5 MHz SAW Filter
Value +28 30 -40 to +85 260°C for 30 s Units dBm VDC °C
• • • •
Low Insert...
Description
Preliminary
®
SF2112D 452.5 MHz SAW Filter
Value +28 30 -40 to +85 260°C for 30 s Units dBm VDC °C
Low Insertion Loss 3.8 X 3.8 X 1.0 mm Surface Mount Case Differential Input and Output Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings
Rating Maximum Incident Power in Passband Max. DC voltage between any 2 Terminals Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile
SM3838-6
Characteristic fO Load Impedance (single ended) 300 kHz to 347.5 MHz 347.5 MHz to 442.5 MHz
Notes 1
Typ 50
Units MHz Ω
35 30 30 30 1.8 0.6 1.8:1 dB dB 2.1:1 27 +85
465 MHz to 2000 MHz
Output VSWR in 450 MHz - 455 MHz Operating Temperature Case Style Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity Reel Size 7 Inch Reel Size 13 Inch
Notes: 1. temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 net2. the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in PCB layout and external impedance matching design. See Applica4. are subject to change. 6. 7.
Either Port 1 or Port 2 may be used for either input or output in the between Port 1 and Port 2, so that the filter must always be installed
trademarks of RF Monolithics, Inc. ©Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972...
Similar Datasheet