285 MHz SAW Filter
SF1103B
• • • •
285 MHz SAW Filter
PRELIMINARY
Designed for WCDMA 3G IF Applications Quartz Temperature Stability Smal...
Description
SF1103B
285 MHz SAW Filter
PRELIMINARY
Designed for WCDMA 3G IF Applications Quartz Temperature Stability Small Size Hermetic 7 x 5 mm Surface-Mount Case
Characteristic Nominal Center Frequency Passband
Rejection
Insertion Loss at fc 1 dB Passband 3 dB Passband Amplitude Ripple over fc ±1.9 MHz Group Delay Variation over fc ±1.9 MHz fc-25 to fc-5.0 and fc+5.0 to fc+25 MHz
Sym fc IL BW1 BW3 GDV
Min
TBD
40 TA -20
Typ 285.000 14.5 ±2.0 ±2.5 0.8 70 42
Max
Units MHz dB MHz dBP-P nsP-P dB °C
Notes 1 1, 2
1.0 150
1, 2, 3 1
Operating Temperature Range Matching to Unbalanced 50 Ω Case Style Lid Symbolization (YY = year, WW = week) See note 4 Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Max Soldering Profile
+80
External L-C SMP-03 7 x 5 mm Nominal Footprint RFM SF1103B YYWW Electrical Connections Connection Terminals Port 1 Hot 10 Port 1 Gnd Return 1 Port 2 Hot 5 Port 2 Gnd Return 6 Case Ground All others
Value Units +10 dBm 30 VDC -40 to +85 °C 235°C for 90 s
Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband....
Similar Datasheet