Document
Aluminum Electrolytic Capacitors/ FP Surface Mount Type
Series:
FP
Type:
V
FP High temperature Lead-Free reflow (suffix:A✽)
● ● ● ●
■ Features
Low ESR (30 % to 50 % less than FK series) Endurance: 2000 h at 105 °C Vibration-proof product is available upon request. (φ8 <) RoHS directive compliant
■ Specifications
Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ W.V. (V) Characteristics at Low Temperature Z(–25 °C)/Z(+20 °C) Z(–40°C)/Z(+20 °C) Z(–55°C)/Z(+20 °C) 6.3 2 3 4 –55 °C to +105 °C 6.3 V.DC to 35 V.DC 10 µF to 1800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater) Please see the attached standard products list 10 2 3 4 16 2 3 4 25 2 3 3 35 2 3 3 (Impedance ratio at 120 Hz)
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the limits specified below. Post-test requirement at +20 °C
Endurance
Capacitance change
tan δ
±30 % of initial measured value < 200 % of initial specified value < initial specified value
DC leakege current
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to Soldering Heat
Capacitance change tan δ DC leakage current
±10 % of initial measured value < initial specified value < initial specified value
■ Marking
Example:6.3 V 22 µF Marking color: BLACK
■ Dimensions in mm(not to scale)
0.3 max. φD±0.5 B±0.2 A±0.2 ( )reference size (I) (I) (P) W K
Negative polarity marking (–) Capacitance (µF)
–
H L±0.3
22 j FP
Lot number Rated Voltage Mark j A C E V 6.3 V 10 V 16 V 25 V 35 V
Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark Size code B C D D8 E F G D 4.0 5.0 6.3 6.3 8.0
+
(mm) L 5.8 5.8 5.8 7.7 6.2 A,B 4.3 5.3 6.6 6.6 8.3 8.3 H max. 5.5 6.5 7.8 7.8 9.5 10.0 12.0 I 1.8 2.2 2.6 2.6 3.4 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 1.8 2.2 3.1 4.6 K 0.35–0.20 to +0.15 0.35–0.20 to +0.15 0.35–0.20 to +0.15 0.35–0.20 to +0.15 0.35–0.20 to +0.15 0.70±0.20 0.70±0.20
8.0 10.2
10.0 10.2 10.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Free Datasheet http://www.datasheetlist.com/
Aluminum Electrolytic Capacitors/ FP
■ Standard Products
Case size W.V. Cap. (±20 %) ✽Size Code Specification Ripple E.S.R. tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (ȑ) EEEFP0J220AR 160 0.85 0.26 EEEFPJ470UAR 160 0.85 0.26 EEEFP0J470AR 240 0.36 0.26 EEEFPJ101UAR 240 0.36 0.26 EEEFP0J101AP 300 0.26 0..