www.vishay.com
173D
Vishay Sprague
Solid-Electrolyte TANTALEX™ Capacitors, Axial-Leaded, Molded Case
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
PERFORMANCE CHARACTERISTICS Operating Temperature: -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance Tolerance: at 120 Hz, +25 °C. ± 20 %, ± 10 % standard ± 5 % available as special Capacitance Range: 0.10 μF to 330 μF. Voltage Rating: 2 VDC to 50 VDC. Dissipation Factor: at 120 Hz, +25 °C. Dissipation factor, as determined from the expression 2fRC, shall not exceed the values listed in the Standard Ratings table. DC Leakage Current (DCL Max.): at +25 °C: leakage current shall not exceed the values listed in the Standard Ratings table.
FEATURES
• Axial through-hole terminations: tin / lead
(SnPb), 100 % tin (RoHS-compliant)
• Miniature axial-lead capacitors available in 5 sizes
Available
• Precision molded in gold colored, flame
retardant, thermosetting epoxy resin
Available
• Laser marked for improved legibility and
tapered end of case provides easy identification of
positive terminal
• Standard orders are lead taped and reeled; orders under 500 are taped only
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
APPLICATIONS
Designed for high performance automotive, industrial and commercial electronic equipment.
at +85 °C: leakage current shall not exceed 10 times the values listed in the Standard Ratings table.
at +125 °C: leakage shall not exceed 15 times the values listed in the Standard Ratings table.
Life Test: capacitors shall withstand rated DC voltage applied at +85 °C for 2000 h and for 1000 h applied at + 25 °C derated voltage.
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements.
2. Dissipation factor shall meet the initial requirement.
3. Change in capacitance shall not exceed ± 10 %.
ORDERING INFORMATION
173D MODEL
335 CAPACITANCE
X9
CAPACITANCE TOLERANCE
006
DC VOLTAGE RATING AT +85 °C
U
CASE CODE
W PACKAGING
E3
RoHSCOMPLIANT
This is expressed in picofarads. The first two digits are the
significant figures. The third is the number of zeros to follow.
X0 = ± 20 % X9 = ± 10 % *X5 = ± 5 % * Special order
This is expressed in volts. To complete the three-digit
block, zeros precede the voltage rating.
See Ratings and Case Codes
table
W = tape and reel Blank = ammo
pack
E3 = 100 % tin termination
(RoHScompliant) Blank = SnPb termination
DIMENSIONS in inches [millimeters]
0.875 [22.23] Min. (-)
L Max.
0.875 [22.23] Min.
(+)
CASE CODE U V W X Y
Tinned solid leads
D (MAX.) 0.095 [2.41] 0.110 [2.79] 0.180 [4.57] 0.180 [4.57] 0.280 [7.11]
Tapered end identifies anode
L (MAX.) 0.260 [6.60] 0.290 [7.37] 0.345 [8.76] 0.420 [10.67] 0.550 [13.97]
D Max.
LEAD DIAMETER 0.020 [0.51] 0.020 [0.51] 0.020 [0.51] 0.020 [0.51] 0.025 [0.64]
Revision: 04-Aug-2020
1
Document Number: 40019
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
RATINGS AND CASE CODES
μF
2V
4V
6V
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
U
3.9
U
4.7
U
U
5.6
U
V
6.8
U
U
V
8.2
U
V
V
10
U
V
V
12
V
V
V
15
V
V
V
18
V
V
W
22
V
V
W
27
V
W
W
33
V
W
W
39
W
W
X
47
W
W
X
56
W
X
X
68
W
X
X
82
Y
100
Y
120
Y
150
Y
180
Y
220
Y
270
Y
330
Y
173D
Vishay Sprague
10 V
U U U V V V V V V W W W W X X X X Y Y Y Y Y Y Y Y
15 V
U
U U U V V V V V V W W W W X X X X Y Y Y Y Y Y Y Y
20 V
U U U V U/V V V V V W W W W X X X X Y Y Y Y Y Y Y Y
25 V
U U U U U V V V V V V W W W W W W X X Y Y Y Y Y Y
35 V U U U U U U U U U V V V V V V W W W W W W X X X X Y Y Y Y Y Y Y Y
50 V U U U U U U V V V V V V V W W W W X X X X Y Y Y Y Y Y Y Y
Revision: 04-Aug-2020
2
Document Number: 40019
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
173D
Vishay Sprague
MARKING
PARAMETER Product type Polarity Capacitance code, pF Capacitance tolerance code Voltage Date code Lead (Pb)-free indicator (1)
Vishay marking
Note (1) On big case sizes (W,X,Y) lead free indicator is printed after date code, for example 1209L.
EXAMPLE 173D + 156 K 25 V 1209 L
2
STANDARD RATINGS
CAPACITANCE (μF)
CASE CODE
PART NUMBER
MAX. DCL AT +25 °C
(μA)
2 VDC AT +85 °C, SURGE = 2.5 V; 1.5 VDC .