3-state hex inverting buffer
HEF40098B
Hex inverting buffer; 3-state
Rev. 8 — 21 November 2011
Product data sheet
1. General description
The HEF40...
Description
HEF40098B
Hex inverting buffer; 3-state
Rev. 8 — 21 November 2011
Product data sheet
1. General description
The HEF40098B is a hex inverting buffer with 3-state outputs. The 3-state outputs are controlled by two active LOW enable inputs (1OE and 2OE). A HIGH on 1OE causes four of the six active LOW buffer elements (1Y0 to 1Y3) to assume a high-impedance or OFF-state regardless of the other input conditions and a HIGH on 2OE causes the outputs of the remaining two buffer elements (2Y0 and 2Y1) to assume a high-impedance or OFF-state regardless of the other input conditions.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.
2. Features and benefits
Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Specified from 40 C to +85 C Complies with JEDEC standard JESD 13-B
3. Ordering information
Table 1. Ordering information All types operate from 40 C to +85 C
Type number Package
Name
Description
HEF40098BP DIP16
plastic dual in-line package; 16-leads (300 mil)
HEF40098BT
SO16
plastic small outline package; 16 leads; body width 3.9 mm
Version SOT38-4 SOT109-1
NXP Semiconductors
4. Functional diagram
HEF40098B
Hex inverting buffer; 3-state
2 1A0 4 1A1 6 1A2 10 1A3 1 1OE 14 2A0 12 2A1 15 2OE
1Y0 3 1Y1 5 1Y2 7 1Y3 9
2Y0 13 2Y1 11
001aae553
Fig 1. Functional diagram
5. Pinning in...
Similar Datasheet