PRODUCT SUMMARY
SKY13530: 0.7 to 2.7 GHz DP10T (SP6T/SP4T) MIPI Main Antenna Switch for Carrier Aggregation
Applications
2G/3G/4G multimode cellular handsets (LTE, UMTS, CDMA2000, EDGE, GSM) Carrier aggregation (LB/HB) Embedded data card
TXLB LB_TRX1 LB_TRX2 LB_TRX3 ANT_LB
Features
Low band 7 insertion loss Integrated B17 3rd harmonic filter on low band antenna Excellent B17 3rd harmonic performance: –95 dBm Dual antenna configuration with integrated GSM low pass filters on TX ports Dual antenna ports can be connected externally to an LB/HB diplexer Integrated MIPI interface Small 2.4 x 2.8 x 1.0 mm 22-lead surface mount package Lead (Pb)-free and RoHS-compliant MSL3 @ 260 °C per JEDEC J-STD-020
Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074.
TXHB HB_TRX1 HB_TRX2 ANT_HB HB_TRX3 HB_TRX4 HB_TRX5
Y0686
Bias
MIPI
VDD
VIO
Figure 1. SKY13530 Functional Block Diagram
Description
The SKY13530 is an SP6T and SP4T with MIPI control antenna switch that is LTE-A Release 10 and Release 11 compliant. Using advanced switching technologies, the SKY13530 maintains low insertion loss and high isolation for both transmit and receive switching paths. The high linearity performance and low insertion loss achieved by the SKY13530 makes it an ideal choice for carrier aggregation applications. The SP6T and SP4T can accommodate UMTS/C2K/EDGE/GSM/ LTE applications as well as intraband carrier aggregation. There is an integrated filter in the low band side of the switch allowing all of the low band TRX ports to be used for B17. The switch also exhibits an excellent 2nd/3rd order intermodulation distortion performance. The SKY13530 is packaged in a small 2.4 x 2.8 x 1.0 mm 22-lead surface mount package. Switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) decoder. There are separate control registers for controlling low band and high band independently. No external DC blocking capacitors are required on the RF paths as long as no DC voltage is applied. The switch can operate over the temperature range of -30°C to +90°C. A functional block diagram of the SKY13530 is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 •
[email protected] • www.skyworksinc.com
203129A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 18, 2014 1
SDATA
SCLK
Free Datasheet http://www.datasheet-pdf.com/
PRODUCT SUMMARY • SKY13530 MIPI MAIN ANTENNA SWITCH FOR CARRIER AGGREGATION
Copyright © 2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Sky.