EYE END / TURNBUCKLE / CLIP LOCKING
INCH-POUND MS21254U 20 November 2002 SUPERSEDING MS21254T 5 November 2001 DETAIL SPECIFICATION SHEET EYE END, TURNBUCKLE...
Description
INCH-POUND MS21254U 20 November 2002 SUPERSEDING MS21254T 5 November 2001 DETAIL SPECIFICATION SHEET EYE END, TURNBUCKLE, CLIP LOCKING This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-8878 and QPL-8878 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation.
FIGURE 1. Eye end, turnbuckle, clip locking.
AMSC N/A
1 of 4
FSC 1560
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Free Datasheet http://www.datasheet4u.net/
MS21254U TABLE I. Dash numbers and dimensions.
Dash number Direction of thread RH LH -2RS -2RL -3RS -3RL -5RS -5RL -6RS -6RL -8RL -9RL -10RL -2LS -2LL -3LS -3LL -5LS -5LL -6LS -6LL -8LL -9LL -10LL Wire rope diameter Nominal reference 1/16 3/32 5/32 1/ 3/16 1/4 9/32 5/16 Minimum 0.062 0.093 0.156 0.187 0.250 0.281 0.312 Minimum breaking strength lbs. 800 1,600 3,200 4,600 8,000 12,500 17,500 Thread T UNF-3A ∅C +0.006 -0.000 ∅D +0.002 -0.000 E +0.031 radius F +0.010 -0.000 J +0.005
0.1380 (#6)-40 0.190 (#10)-32 0.250 (1/4)-28 0.3125 (5/16)-24 0.3750 (3/8)-24 0.4375 (7/16)-20 0.5000 (1/2)-20
0.094 0.190 0.133 0.189 0.243 0.306 0.362 0.425 0.250 0.313 0.375 0.438 0.500
0.125 0.031 0.156 0.219 0.047 0.250 0.281 0.359 0.406 0.063 0.078
0.125 0.188 0.219 0.281 0.328 0.375 0.469
1/ ...
Similar Datasheet