Intelligent Power Module
STK544UC62K-E
Intelligent Power Module (IPM) 600 V, 10 A
Overview This Inverter IPM includes the output stage of a 3-ph...
Description
STK544UC62K-E
Intelligent Power Module (IPM) 600 V, 10 A
Overview This Inverter IPM includes the output stage of a 3-phase inverter, pre-drive circuits, bootstrap circuits, and protection circuits in one package.
www.onsemi.com
Function SIP (single in-line package) of the transfer full mold structure. The emitter line of the each lower phase outputs to an external terminal with the option of control using 3-phase current detection with external resistors. Direct input of CMOS level control signals without an insulating circuit is possible. Protective circuits including over current and pre-drive low voltage protection are built in. A single power supply drive is enabled through the use of bootstrap circuits for upper IGBT gate drives. Built-in dead-time for shoot-thru protection. Internal substrate temperature is measured with an internal pulled up thermistor.
Certification UL1557 (File Number : E339285)
Specifications Absolute Maximum Ratings at Tc = 25C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage Collector-emitter voltage
VCC VCE
V+ to VRU(VRV,VRW), surge < 500 V V+ to U(V,W) or U(V,W) to VRU(VRV,VRW)
*1 450 600
V V
Output current
Output peak current Pre-driver voltage
Io
Iop VD1,2,3,4
V+, VRU,VRV,VRW, U,V,W terminal current
V+, VRU,VRV,VRW, U,V,W terminal current at Tc = 100C
V+, VRU,VRV,VRW, U,V,W terminal current for a pulse width
of 1 ms
VB1 to U, VB2 to V, VB3 to W, VDD to VSS
*2
±10 ±6
±20
20
A A
A
V
Input signal...
Similar Datasheet