HB619-1

10BASE-T Single Port Ethernet Magnetics Module HB6xx-Schematic #7, Rev. C 02 Oct 00 (“xx” equals one of the circuit numbers in the table below the schematic) Other circuit schematics are available. Please contact us at (800) 511-7308 or visit our web site at www.trans-power.com. 0.920 Max 0.250 Max (See Note 1) 0.010 0.100 0.010 Note 1: Low profile package (-LP) max height is 0.215. 0.040 0.380 max 0.520 Max 0.100 0.460 0.100(14X) 0.700 HB6xx SCHEMATIC #7 1 RX 2 3 4 5 6 TX 7 8 T1 CMC1 T2 CMC2 16 15 14 13 12 11 10 9 1CT:1CT Standard Features: -Single channel interface -Compliant with IEEE 802.3 Standard -Surface mount package designed for IR reflow process (240oC peak) For alternate signal routing and other available schematics, see schematic “HB6xx-Schematic #6”. Chip Side Cable Side See Table 10BASE-T Part Number Table Part Number HB619-1 HB620-1 HB624-1 HB624ET-1 HB625-1 HB628-1 HB629-1 HB631-1 HB634-1 HB635-1 HB636-1 Notes: 1. The 24-1, 24ET-1 and 36-1 circuits have one 4 line CMC 2. OCL, Cww and LL are measured at 0.10Vrms at 100KHz 3. TX OCL is 80uH Min @ 25°C, 35uH Min @ -40°C RX OCL is 389uH Min @ 25°C, 200uH Min @ -40°C 4. TX and RX OCL is 140uH Min @ 25°C, 60uH Min @ -40°C 5. Dielectric isolation is 1500Vrms TX Turns Ratio (Chip:Cable) 1:1.41 1:2 1:2.5 1:2.5 1:1.41 1:2 1:1 1:1.41 1:2 2:1 2:1 CMC1 No Yes CMC2 No Yes OCL uH (Min) 140 140 140 Note 3 140 Note 4 140 140 140 140 140 LL uH (Max) 0.40 0.30 0.40 0.40 0.40 0.30 0.40 0.40 0.40 0.70 1.00 Cww pF (Max...