Dual Fast Recovery Power Rectifiers
MOSPEC
Switchmode Dual Fast Recovery Power Rectifiers
Designed for use in switching power supplies. inverters and as fre...
Description
MOSPEC
Switchmode Dual Fast Recovery Power Rectifiers
Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ¡¯ ¡¯ ¡¯ ¡¯ ¡¯ ¡¯ ¡¯ Glass Passivated chip junctions Low Reverse Leakage Current Fast Switching for High Efficiency 150¢J Operating Junction Temperature Low Stored Charge Majority Carrier Conduction Low Forward Voltage , High Current Capability Plastic Material used Carries Underwriters Laboratory
F20C05 Thru F20C20
FAST RECOVERY RECTIFIERS 20 AMPERES 50-200 VOLTS
Flammability Classification 94V-O
MAXIMUM RATINGS
Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=125¢J Per Total Device Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz) Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range Symbol 05 VRRM VRWM VR VR(RMS) 50 10 100 F20C 15 150 20 200 V Unit
TO-220AB
35
70
105
140
V
IF(AV)
10 20 20
A
IFM
A
DIM A B C D E F G H I J K L M O
IFSM
175
A
TJ , Tstg
-65 to +150
¢J
ELECTRIAL CHARACTERISTICS
Characteristic Maximum Instantaneous Forward Voltage ( IF =10 Amp TC = 25¢J ) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25¢J ) ( Rated DC Voltage, TC = 125¢J ) Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Typical Junct...
Similar Datasheet