DatasheetsPDF.com

SMBJ64 Dataheets PDF



Part Number SMBJ64
Manufacturers Microsemi
Logo Microsemi
Description Transient Voltage Suppressor
Datasheet SMBJ64 DatasheetSMBJ64 Datasheet (PDF)

SMBJ5.0 thru SMBJ170CA and SMBG5.0 thru SMBG170CA SCOTTSDALE DIVISION SURFACE MOUNT 600 Watt Transient Voltage Suppressor DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in a Gull-wing design (SMBG) in the DO-215AA for visible solder connecti.

  SMBJ64   SMBJ64


Document
SMBJ5.0 thru SMBJ170CA and SMBG5.0 thru SMBG170CA SCOTTSDALE DIVISION SURFACE MOUNT 600 Watt Transient Voltage Suppressor DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in a Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available in both unidirectional and bidirectional configurations with a C or CA suffix part number. Their response time is virtually instantaneous. As a result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for inductive switching environments and induced RF protection. They can also protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPEARANCE WWW . Microsemi . C OM NOTE: All SMB series are equivalent to prior SMS package identifications. FEATURES • • • • • • Economical surface mount design in both J-bend or Gull-wing terminations Available in both unidirectional and bidirectional construction (add C or CA suffix for bidirectional) Selections for 5.0 to 170 volts standoff voltages (VWM) Suppresses transients up to 600 watts @ 10/1000 µs (see Figure 1) Fast response Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. Axial-lead equivalent packages for thru-hole mounting available as P6KE6.8 to P6KE200CA (consult factory for other surface mount options) Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • • • • APPLICATIONS / BENEFITS Protects sensitive components such as IC’s, CMOS, 2 Bipolar, BiCMOS, ECL, DTL, T L, etc. Protection from switching transients & induced RF Compliant to IEC61000-4-2 and IEC61000-4-4 for ESD and EFT protection respectively Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1: SMB 5.0 to SMB 120A or CA Class 2: SMB 5.0 to SMB 60A or CA Class 3: SMB 5.0 to SMB 30A or CA Class 4: SMB 5.0 to SMB 15A or CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1: SMB 5.0 to SMB 36A or CA Class 2: SMB 5.0 to SMB 18A or CA • • • MAXIMUM RATINGS • Peak Pulse Power dissipation at 25 C: 600 watts at 10/1000 µs (also see Fig 1,2, and 3). • Impulse repetition rate (duty factor): 0.01% • tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional • Operating and Storage temperature: -65ºC to +150ºC • Thermal resistance: 25 ºC/W junction to lead, or 90ºC/W junction to ambient when mounted on FR4 PC board (1oz Cu) with recommended footprint (see last page) • Steady-State Power dissipation: 5 watts at TL = 25oC, or 1.38 watts at TA = 25ºC when mounted on FR4 PC board with recommended footprint • Forward Surge at 25ºC: 50 Amps peak impulse of 8.3 ms half-sine wave (unidirectional only) • Solder temperatures: 260 ºC for 10 s (maximum) Copyright  2002 10-14-2003 REV C º MECHANICAL AND PACKAGING • • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Gull-wing or C-bend (modified J-bend) leads, tin-lead plated solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band. No marking on bi-directional devices MARKING: Part number without prefix (e.g. 5.0, 5.0A, 5.0CA, 36, 36A, 36CA, etc.) TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape, 750 per 7 inch reel or 2500 per 13 inch reel (add “TR” suffix to part number) WEIGHT: 0.1 grams See package dimension on last page SMB 5.0 – 170V • • • • • Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 Free Datasheet http://www.datasheet4u.com/ SMBJ5.0 thru SMBJ170CA and SMBG5.0 thru SMBG170CA SCOTTSDALE DIVISION SURFACE MOUNT 600 Watt Transient Voltage Suppressor ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER GULL-WING MODIFIED “J” LEAD BEND LEAD SMBG5.0 SMBJ5.0 SMBG5.0A SMBJ5.0A SMBG6.0 SMBJ6.0 SMBG6.0A SMBJ6.0A SMBG6.5 SMBJ6.5 SMBG6.5A SMBJ6.5A SMBG7.0 SMBJ7.0 SMBG7.0A SMBJ7.0A SMBG7.5 SMBJ7.5 SMBG7.5A SMBJ7.5A SMBG8.0 SMBJ8.0 SMBG8.0A SMBJ8.0A SMBG8.5 SMBJ8.5 SMBG8.5A SMBJ8.5A SMBG9.0 SMBJ9.0 SMBG9.0A SMBJ9.0A SMBG10 SMBJ10 SMBG10A SMBJ10A SMBG11 SMBJ11 SMBG11A SMBJ11A SMBG12 SMBJ12 SMBG12A SMBJ12A SMBG13 SMBJ13 SMBG13A SMBJ13A SMBG14 SMBJ14 SMBG14A SMBJ14A SMBG15 SMBJ15 SMBG15A SMBJ15A SMBG16 SMBJ16 SMBG16A SMBJ16A SMBG17 SMBJ17 SMBG17A SMBJ17A SMBG18 SMBJ18 SMBG18A SMBJ18A SMBG20 SMBJ20 SMBG20A SMBJ20A SMBG22 SMBJ22 SMBG22A SMBJ22A SMBG24 SMBJ24 SM.


SMBJ60A SMBJ64 SMBJ64A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)