Document
Aluminum Electrolytic Capacitors/ TG Surface Mount Type
Series: ● ● ● ● ●
TG
Type:
V
■ Features
Endurance:125 °C 1000 h to 2000 h Miniaturization (40 % less than TA Series) Low ESR (Low temp) Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant (Parts No φ8 to φ10 : EEE✽, φ12.5 to φ18 : EEV✽)
■ Specifications
Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature W.V. (V) Z(–25 °C)/Z(+20 °C) Z(–40 °C)/Z(+20 °C) 10 3 6 –40 °C to +125 °C 10 V.DC to 100 V.DC 10 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached standard products list 16 25 35 50 63 80 100 2 2 2 2 2 2 2 4 4 3 3 3 3 3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 1000 hours (φ8҂6.2), 2000 hours (φ8҂ 10.2 <) at +125 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Endurance Capacitance change tan δ DC leakage current ±30 % of initial measured value (code U : ±35 %) < 300 % of initial specified value (code U : ±350 %) < initial specified value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value
Resistance to Soldering Heat
■ Frequency correction factor for ripple current
Frequency (Hz) Correction factor 120 0.65 1k 0.85 10 k 0.95 100 k to 1.00
■ Marking
Example : 10 V 100 µF, 10 V 1000 µF Marking coloc : BLACK Lead-Free products ( < φ10)
Rated Voltage Mark
■ Dimensions in mm (not to scale)
100
Negative polarity marking (–)
Capacitance (µF) φD±0.5 H Series identification Mark for Lead-Free Products Black Dot (Square)
–
B±0.2
Lead-Free products ( > φ12.5)
Rated Voltage Mark
L Pressure Relief (φ10 and larger)
W
( ) Reference size
1000
Negative polarity marking (–)
Capacitance (µF) Series identification Size code E F G H13 J16 K16 D 8.0 8.0 10.0 12.5 16.0 18.0 L 6.2±0.3 10.2±0.3 10.2±0.3 13.5±0.5 16.5±0.5 16.5±0.5 A, B 8.3 8.3 10.3 13.5 17.0 19.0 H 9.5 max. 10.0 max. 12.0 max. 15.0 max. 19.0 max. 21.0 max. I 3.4 3.4 3.5 4.7 5.5 6.7 W 0.65±0.1 0.90±0.2 0.90±0.2 0.90±0.3 1.20±0.3 1.20±0.3 P 2.2 3.1 4.6 4.4 6.7 6.7 (mm) K
0.15 0.35 + - 0.20 0.70±0.20 0.70±0.20 0.70±0.30 0.70±0.30 0.70±0.30
A TG
Lot number Rated Voltage Mark
A C E V
10 V 16 V 25 V 35 V
H J K 2A
50 V 63 V 80 V 100 V
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.
(I) 03 Sep. 2011
Lot number
+
– EE70 –
Free Datasheet ht.