Stacked Metallized PPS Film Chip Capacitor
Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor
Type:
ECHU(X)
Stacked metallized PPS film as dielec...
Description
Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor
Type:
ECHU(X)
Stacked metallized PPS film as dielectric with simple mold-less construction
■ Features
Small in size (minimum size 1.6 mm ✕ 0.8 mm) 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours For reflow soldering RoHS directive compliant
■ Recommended Applications
Time-constant Filtering Oscillation and resonance
■ Explanation of Part Numbers
1 2 3 4 5 6 7 8 9 10 11 12
E
C
H
U
Rated voltage Capacitance
X
Cap. Tol. Suffix Suffix
Product code
Dielectric & construction
1C 16 VDC 1H 50 VDC
G ±2 % J ±5 %
■ Specifications
Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions 55 16 VDC to 125
Tape width Reel diameter ❈ Tape width 8 mm and diameter 8 mm 5 size ø180 mm ø330 mm reel is prepared. 12 mm 9 size ø330 mm
50 VDC at more than 105 )
(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / 0.00010 µF to 0.22 µF (E12) ±2 %(G), ±5 %(J) Between terminals : Rated volt. (VDC)✕150 % 60 s tan 0.6 % (20 , 1 kHz) 16 VDC IR 3000 M (20 50 VDC IR 3000 M (20 , 10 VDC, 60 s) , 50 VDC, 60 s)
Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)
❈ Please consult us for flow soldering ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, p...
Similar Datasheet