DatasheetsPDF.com

SLF464-0UY-120A Dataheets PDF



Part Number SLF464-0UY-120A
Manufacturers LEDTRONICS
Logo LEDTRONICS
Description Miniature Based LED Lamps
Datasheet SLF464-0UY-120A DatasheetSLF464-0UY-120A Datasheet (PDF)

www.DataSheet4U.com Miniature Based LED Lamps LEDTRONICS, INC. THE FUTURE OF LIGHT 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: [email protected] Website: www.ledtronics.com Once limited to simple status indicators, Light Emitting Diodes (LEDs) now play prominent roles in back lighting, panel indication, decorative illumination, emergency lighting, animated signage, etc.... The emergence of LEDs as a viable alternative to .

  SLF464-0UY-120A   SLF464-0UY-120A



Document
www.DataSheet4U.com Miniature Based LED Lamps LEDTRONICS, INC. THE FUTURE OF LIGHT 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: [email protected] Website: www.ledtronics.com Once limited to simple status indicators, Light Emitting Diodes (LEDs) now play prominent roles in back lighting, panel indication, decorative illumination, emergency lighting, animated signage, etc.... The emergence of LEDs as a viable alternative to incandescent lighting can be attributed to new manufacturing technologies, packaging innovations and an increasing number of colors. These factors along with the growing awareness of the advantages of LEDs (e.g., a life span measured in years not hours, vivid sunlight-visible colors and low power requirements) have engineers, product designers, purchasing agents and component vendors viewing LEDs in a whole new light. For many applications LED lamps are superior to incandescent lighting. So why is it that in tens of millions of switches, indicators, control panels, signs, annunciators, displays, decor lights and dozens of other applications, design engineers still specify incandescent technology? It might be that they’re just a few years behind what’s really happening in LED www.DataSheet4U.com illumination. Although advances made in LED technology in the past few years have dramatically broadened the applications for these rugged little light sources, it wasn’t that long ago that red was the only “daylight-visible” colored LED. And that wasn’t the only thing limiting their use! Unlike incandescent bulbs that give off the full spectrum of light in a spherical pattern, LEDs emit a focused beam of a single wavelength (color) in only one direction, in a variety of angles. For many applications, such as indicators or switch illuminators, this is not a problem, but it took the development of multi-chip arrays and high-flux LED chips to begin to achieve the effect of an incandescent filament. Major advancements in LED technology have taken place in recent years such as development of new “doping” technologies that increase LED light output by as much as 20 times over earlier generations, and allow the production of daylight-visible LEDs in virtually any color of the spectrum. In addition to red, yellow, and amber/orange, LEDs are now available in many colors from leaf green to ultra blue. Even white light, long thought to be an impossibility, is now available in three different shades as a light-emitting diode. The efficiency of LEDs is most apparent in applications requiring color. Light from a typical incandescent bulb must be filtered so that only light from a particular part of the spectrum (e.g., red, amber or green, etc...) for example—is visible. While LEDs deliver 100 percent of their energy as colored light, incandescent bulbs waste 90 percent or more of their energy in light blocked by the colored lens or filter. Incandescent bulbs also waste 80 percen.


SLF461-0UY-024B SLF464-0UY-120A SLF464-0UY-130B


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)