DatasheetsPDF.com

30KP180 Dataheets PDF



Part Number 30KP180
Manufacturers Microsemi Corporation
Logo Microsemi Corporation
Description 30kW Transient Voltage Suppressor
Datasheet 30KP180 Datasheet30KP180 Datasheet (PDF)

30KP33 thru 30KP400A 30kW Transient Voltage Suppressor SCOTTSDALE DIVISION DESCRIPTION These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 33 to 400 volt standoff voltages (VWM) in both unidirectional and bi-dire.

  30KP180   30KP180



Document
30KP33 thru 30KP400A 30kW Transient Voltage Suppressor SCOTTSDALE DIVISION DESCRIPTION These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 33 to 400 volt standoff voltages (VWM) in both unidirectional and bi-directional with either 5% or 10% tolerances of the Breakdown Voltage (VBR). Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPEARANCE WWW . Microsemi . C OM FEATURES • • • • • Available in both Unidirectional and Bidirectional construction (Bidirectional with C or CA suffix) Selections for 33 to 400 volt standoff voltages VWM Suppresses transients up to 30 kW @ 10/1000 µs and 200 kW @ 8/20 µs (see Figure 1) Fast response Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B APPLICATIONS / BENEFITS • Protection from switching transients and induced RF • Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 • Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1,2,3,4: 30KP33A - 30KP400A or CA Class 5: 30KP33A - 30KP400A or CA (short distance) Class 5: 30KP33A - 30KP220A or CA (long distance) • Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1,2, 3: 30KP33A to 30KP400A or CA Class 4: 30KP33A to 30KP220A or CA • Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: 30KP33A to 30KP400A or CA Class 3: 30KP33 to 30KP220A or CA Class 4: 30KP33 to 30KP110A or CA • MAXIMUM RATINGS • • • • • Peak Pulse Power dissipation at 25 C: 30,000 watts at 10/1000 µs (also see Figures 1 and 2) Impulse repetition rate (duty factor): 0.05% tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating & Storage temperature: -65ºC to +150ºC Thermal resistance: 17.5ºC/W junction to lead, or 77.5ºC/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm Steady-State Power dissipation: 7 watts at TL = 27.5oC, or 1.61 watts at TA = 25ºC when mounted on FR4 PC board described for thermal resistance Forward Surge: 250 Amps 8.3 ms half-sine wave Solder temperatures: 260 ºC for 10 s (maximum) º MECHANICAL AND PACKAGING • • • • • • • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 FINISH: Tin-Lead plated readily solderable per MILSTD-750, method 2026 MARKING: Body marked with part number P.


30KP170A 30KP180 30KP180A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)