DatasheetsPDF.com

F931E106MCC Dataheets PDF



Part Number F931E106MCC
Manufacturers Nichicon
Logo Nichicon
Description (F93 Series) Solid Tantalum Electrolytic Capacitors
Datasheet F931E106MCC DatasheetF931E106MCC Datasheet (PDF)

www.DataSheet4U.com SOLID TANTALUM ELECTROLYTIC CAPACITORS F93 Resin-molded Chip, Standard Series Specifications Item Category Temperature Range Capacitance Tolerance Dissipation Factor E.S.R. Performance Characteristics --55 ~ +125˚C (Rated temperature : 85˚C) ± 20%, ± 10% (at 120Hz) Refer to P.217 Refer to P.217 • After 1 minute's application of rated voltage, leakage current at 20˚C is not more than 0.01CV or 0.5µA, whichever is greater. • After 1 minute's application of rated voltage, le.

  F931E106MCC   F931E106MCC



Document
www.DataSheet4U.com SOLID TANTALUM ELECTROLYTIC CAPACITORS F93 Resin-molded Chip, Standard Series Specifications Item Category Temperature Range Capacitance Tolerance Dissipation Factor E.S.R. Performance Characteristics --55 ~ +125˚C (Rated temperature : 85˚C) ± 20%, ± 10% (at 120Hz) Refer to P.217 Refer to P.217 • After 1 minute's application of rated voltage, leakage current at 20˚C is not more than 0.01CV or 0.5µA, whichever is greater. • After 1 minute's application of rated voltage, leakage current at 85˚C is not more than 0.1CV or 5µA, whichever is greater. • After 1 minute's application of derated voltage, leakage current at 125˚C is not more than 0.125CV or 6.3µA, whichever is greater. +15% Max. (at +125˚C) +10% Max. (at +85˚C) --10% Max. (at --55˚C) At 40˚C 90 ~ 95% R.H. 500 hours Capacitance Change Within ±10% of initial value Dissipation Factor......Initial specified value or less Leakage Current........Initial specified value or less --55˚C / +125˚C 30 minutes each 5 cycles Capacitance Change Within ±5% of initial value Dissipation Factor......Initial specified value or less Leakage Current........Initial specified value or less Test condition: 5 seconds immersion at 260˚C,10 seconds reflow at 260˚C Capacitance Change Within ±5% of initial value Dissipation Factor......Initial specified value or less Leakage Current........Initial specified value or less After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, seconds OFF, for 1000 sucessive test cycles at 85˚C, capacitors meet the characteristics requirements listed below. Capacitance Change....Within ±5% of initial value Dissipation Factor........Initial specified value or less Leakage Current..........Initial specified value or less After 2000 hours' application of rated voltage in series with a 3Ω resistor at 85 ˚C , or derated voltage in series with a 3 Ω resistor at 125 ˚C , capacitors meet the characteristic requirements listed below. Capacitance Change......Within ±10% of initial value Dissipation Factor..........Initial specified value or less Leakage Current............Initial specified value or less Leakage Current Capacitance Change by Temperature Damp Heat (No voltage applied) Type numbering system (Example: 10V 10µF) 1 2 3 4 5 6 7 8 9 10 11 Taping code (Refer to page 211 for details) Case code Capacitance tolerance Rated Capacitance Rated voltage Series Temperature Cycles F 9 3 1 A 1 0 6 M A Resistance to Soldering Heat Drawing A • B Case L H W1 L H C • N Case Surge∗ W1 Endurance∗ W2 S S S S (mm) W2 Dimensions Case code A B C N 3.2 3.5 6.0 7.3 L ± 0.2 ± 0.2 ± 0.2 ± 0.2 W1 1.6 ± 0.2 2.8 ± 0.2 3.2 ± 0.2 4.3 ± 0.2 W2 1.2 ± 0.1 2.2 ± 0.1 2.2 ± 0.1 2.4 ± 0.1 H 1.6 ± 0.2 1.9 ± 0.2 2.5 ± 0.2 2.8 ± 0.2 Shear Test DataSheet4U.com S 0.8 ± 0.2 0.8 ± 0.2 1.3 ± 0.2 1.3 ± 0.2 After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered bef.


F931E475MBA F931E106MCC F931E156MCC


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)